Specials  
 

7-8-09 Inner Circle

7-8-09 Inner Circle
 
 

Greetings Turbo Regal Inner Circle Members - 07-08-2009

THE BUICK V6 LOGO

Many of us Turbo Regal owners mistakenly refer to the "V6" logo as the "Turbo-6" or "Turbo" logo. This arrow logo is usually portrayed in orange and red and Buick refers to it as the V6 logo.

It appears over a dozen times on a typical 1986-1987 Grand National.

The emblem appears on the four wheel center caps, a pair of headrests, the under-the-hood pad, the visor decal, the dash trim nameplate, and there are three emblems on the exterior of the car, to name most of the locations.

I have some original literature with a Buick statement that says:

"As the Buick V6 becomes more dominant in the market place, the Buick V6 logo will take on increased significance.

The logo represents a "6" which is emphasized to indicate the Buick V6 is unique and special.

Additionally, the logo represents a lower case "b" which could be utilized to develop a performance image logotype exclusively "Buick."

The flow of the logo is also symbolic of the spinning or turbine action of the turbocharger. Turbocharging can also be emphasized by using warm-to-hot color combinations.

The arrowhead draws attention and gives forward, aggressive motion. This is complimented by the slant of the logo - again emphasizing aggressiveness.

This logo symbolizes the Performance Engine of the Future."

This statement appeared during the 1984-1987 time frame when the Grand National brought awareness to the performance public.

This logo was originally designed by Molly and is best known for appearing on the Grand Nationals.

You're probably wondering just how many different Buick models did that V6 logo appear in various formats?

I came up with 7 different models. In my private collection, I have 5 of the different emblems to back this up.

One of the rarest logos, since only one appeared on each car, was used on the 1981 Buick Regal Pace Car. Records indicate there were only 233 produced. The V6 logo appeared in orange and red on a small plastic dash plaque, which also had the car number. The emblems on the outside were all decals.

In 1983 Buick introduced an entire lineup of T-Types, most notably the Regal and the Riviera. The Regal received a small plastic-like V6 two-tone emblem on the fender. This was also possibly on the 1982-1/2 Grand National. From what I have read, only the prototype(s) 1982-1/2 Grand Nationals received this small V6 logo on the front fenders. I also read that production 1982-1/2 Grand Nationals received that same 1984-1987-style fender emblem. Unfortunately, I don't have this early emblem in my collection, nor do I have a photo of it.

The Riviera received a metal emblem that read "TURBOCHARGED" followed by the orange and red V6 logo on each fender. I believe a slightly smaller emblem appeared on the dash as well. They used this for the 1983 and 1984 turbocharged Rivieras and possibly 1985. This emblem had the same overlap reverse design that is found on the 1986-1987 Grand National center caps. Was this done on purpose or was it a mistake? I have no idea.

Starting in 1984, with the introduction of the non-intercooled Grand National, they put a pair of Grand National badges on each fender. The 1984 and 1985 models did NOT get a third emblem on the trunk lid. The 1986 and 1987 Grand Nationals received the fender emblems and a matching emblem on the trunk lid. The 1984-1987 emblems are still the most popular seen today.

Backtracking to 1986, two other rare emblems would appear which featured the V6 logo in solid red. One also said "Grand National" and looked almost identical to the red and orange version used on the Grand Nationals, except this was for the 117 LeSabre Grand Nationals they produced. These were not turbocharged and simply featured the V6 3.8 engine and the new front wheel drive platform. This emblem was only available for a short time in the GM parts system, probably less than 2 years.

Under the Century model, a limited production aggressive-looking Gran Sport model was produced. The emblem looks almost like the LeSabre Grand National emblem, just slightly smaller and said "Gran Sport." This appeared on each fender, and it may have also been on the trunk lid as well. A small matching emblem appeared on the dash on the passenger's side. In many ways, this appeared to be marketed as a cheaper version of the Grand National since it had a very similar color theme, both inside and out. Going by memory, production of this model was less than 1,500 produced.

These are the main identification emblems that I am aware of that Buick used during the 1980s that highlighted the V6 engine. Also on the non-turbo 3.8 engines various models had a metal medallion imbedded in the intake plenum. This can be seen on every 1984-1985 Turbo Regal. Having owned two different 1986 LeSabre Grand Nationals they also had a V6 emblem imbedded in the intake plenum. I have seen over the years various other V6 metal medallions in different colors that may or may not have appeared in other 3.8 applications during the 1980s.

Most of the emblems we have mentioned in this article can be seen on our website posted under this week's Inner Circle. We have posted 4 pictures to go with this article.

I do have a few of the emblems for sale... I have some of the Grand National red emblems, the Century emblems, and the Riviera turbocharged emblems. You must email me for prices and availability - denniskirban@yahoo.com

CAPTIONS for the photos on the web site -

PHOTO 1 - Emblem "A" shows the popular 1984-1987 Grand National exterior 5-3/8" x 1-7/8" metal emblem. Emblem "B" shows the very rare 1986 LeSabre Grand National metal emblem. It is identical in size and similar in design, except it has a solid red 6 symbol.

PHOTO 2 - Emblem "C" shows the 4" x 1" metal emblem used on the turbocharged 1983-1984 Rivieras. This emblem may have been used in the later versions as well. It is also one of the two emblems where the overlap is reversed on the 6 portion - You can clearly see the difference in the 6 portion in these two emblems… the arrow crosses on top on the "C" emblem, and it crosses UNDER on the "D" emblem. Emblem "D" shows the 5" x 1-1/2" metal emblem used for the Gran Sport Century, which was only made in 1986 and fewer than 1,200 were produced. In many ways, it had the appearance of the Grand National emblem.

PHOTO 3 - Emblem "E" shows the Buick 1-3/8" diameter emblem that was embedded in the upper plenum of some of their 3.8 engines. Emblem "F" shows the 3-1/2" x 1-1/4" plastic dash emblem used on the 1981 Buick Regal Pace Car. Each emblem was individually numbered to match each car; this one is #147 of 233 produced.


PHOTO 4 - Emblems "G" and "H" are two more V6 logo emblems which were probably used on the plenums of other 3.8 engines. These are both metal and measure 1-1/2" in diameter, slightly larger than the round "E" emblem in Photo 3. Over the years, I have seen other versions, which were probably used on other T-Type models.



UPCOMING TRIP PLANS

We will be set up as a Bronze Sponsor (vendor) at the "Back to the Bricks" event in Flint, Michigan on August 12-15. Their website is - www.backtothebricks.org

This event attracted 20,000 cars last year over a 4-day period. They basically shut down most of Flint during the Friday and Saturday activities. It is run entirely by car people. Matter of fact, one of our customers is involved and emailed the info to us.

Paul Castle will be with us as well. Since the event attracts a wide variety of car owners, we will be selling ZDDPlus™, the ZPaste™, and various DVDs, etc.

This should be a huge event, so if you are able to make it, be sure to come see us. We'll be set up with the major vendors in the main area.

It's been a few years since I have been to Flint. I was there in the late 1980s and actually got a personal tour of the engine factory when they were building the 3800 engines. I was there again with my wife, I think in the summer of 1992 when we took delivery in Pontiac of our GMC Syclone.


NEWS - NEW CHROME HEADLIGHT BEZELS AND GRILLE

Announcing 1984-1987 Regal - reproduction chrome-plated plastic headlight bezels and reproduction chrome-plated plastic grilles.

Part #7238 - 1984-1987 Regal - Reproduction Chrome-plated Plastic Headlight Bezels (2). These chrome-plated plastic headlight bezels are identical to what GM used on their optional chrome-package in 1987. The 1984-1986 bezel were originally black. These will fit all 1984-1987 Regals. These are made by the same source that did the black headlight bezels. They are sold as a pair. Price is $199 / pair plus shipping.

Part #7239 - 1984-1987 Regal - Reproduction Chrome-plated Plastic Grille. This grille is all chrome, which gives a slightly custom look to any 1984-1987 Regal. Originally the GM factory grille was chrome only the protruding edge and the sides of each rib were painted grey. This reproduction grille is all chrome in appearance, which is a slick way to customize the front end. Grille will fit all 1984-1987 Regals. These are made by the same source that did the black headlight bezels. Price is $369 each plus shipping.


NEW PRODUCTS

One of the major annoying shortcomings with the analog dash clusters is the illumination system GM used.

Instrumentation lighting has come a long way from what you see in your Turbo Regal. If you ever have had your dash cluster out of the car, you could see how poorly the illumination format was designed. GM used a series of just 7 twist-in sockets that only extended the light bulbs in the dash about 3/4 of an inch. This format just does not spread enough light to the face area of the analog instruments, which sit further into your dash.

If you drive any newer car, you can see just how far advancements have come in dash illumination. You are limited on choices for our cars but we now feel we have a very slick solution.

Working with the local company that just made our Touch & Start® System, we gave him an analog dash and they developed a LED light system that would be a simple plug and play.

The end results are nothing short of amazing when compared to the factory lighting format.

Check out our website for photos so you can see the difference first hand.

We show illuminated photos of an original dash and a dash with the LEDs installed. There is a photo of the new LED stick and an original light bulb. We also posted a photo showing the seven 2" long LED sticks, which are what you install to accomplish this new lighting system.

Each LED stick has four small lights on the one end. Good for 50,000 hours of operation and draws less current than the factory setup. Each LED stick is pre-tested. The main feature to make this work properly was making the part extend in your dash cluster further than the factory light bulb setup. This new format is 2" long versus your factory design, which only places the factory #194 bulb 1/2" inward. The LED format has four bulbs on each insert, which totals 28 lights (instead of the factory 7 bulbs).

As many of you know, my mechanical skills are very limited, but I was able to do the installation myself. While installing the new LEDs, I also took the necessary photos to do the detailed instructions on how to remove your factory twist-in bulbs and install this new LED setup in any Turbo Regal with an analog dash.

This will only work with the analog dash. Digital dash lighting lights the individual numbers, so we only made this for all the 1984-1987 Turbo Regals that have the standard analog dash.

As you can see in the copy that follows, we have an introductory price on this new lighting system.

Even if you have an all-original Turbo Regal, this is one upgrade that is not detectable nor does it take away from your car being original.

The older you get, the tougher it gets to see the dash at night! I know from firsthand experience!

You are looking at the dash constantly while driving at night. Now you can clearly see it! Part of the expense in making this new system is due to the fact each LED is not simply some cheap little light setup, but requires a 2" long board to position the light properly. The system requires 7 of them, all the same length to make it project the light beam.

This part will be made available to any interested other Turbo Regal suppliers as well.

Here's our detailed description -

1984-1987 Turbo Regal -
ANALOG DASH LED LIGHTS (7) KIT
Introducing an excellent dash LED lighting system...

GM's method for the illuminating of the analog instrument cluster in the 1984-1987 Turbo Regals is limited, as shown in the photo above on the left. There is a vast difference in the way the instrument clusters light up in the newer cars of today compared to the lighting in these older Buicks. Our new system uses modern LED lights to brighten the dash cluster, as shown in the photo above on the right in our Turbo-T.

The problem is Buick used a series of 7 twist-in sockets with factory #194 bulbs. If you examine the back of the dash cluster, you will see that this arrangement does not put enough light on the gauges. Part of the reason is the actual light sockets do not protrude far enough into the housing to illuminate the dash cluster well. Adding to the problem is that the actual light bulbs do not give off a very bright light.

Our setup utilizes 7 LED sticks, as shown in the third photo. There are a total of 4 white LED lights at the end of each stick, for a total of 28 LEDs. The electronics are at the opposite end of the stick which keeps the minor amount of heat separate from the LEDs. The cooler they stay, the brighter the lights. Each are custom made, are assembled in the U.S.A., and measure 2" long. The factory setup only extends the bulb about 1/2". The average LED light span is 50,000 hours.

NOTE - You need the factory sockets currently in the dash cluster to attach to the LED sticks. Socket housings are not included.

Each LED stick is designed to fit in the factory sockets. The sticks extend the light further inward, which illuminates the gauge faceplate better. The last photo shows the new LED stick and an original #194 light bulb.

The end result is amazing! It's not only a better method of lighting your dash at night, but the light is now a brighter light. Your dimmer dial will still function to some degree. This system also draws less current than the original lights.

The kit comes with step-by-step directions with photos showing how to install the kit in your Turbo Regal. You can actually snake the lights into the dash once it's pulled forward without unhooking the speedometer cable or VSS sensor. I was able to install these lights in my personal Turbo-T in under 2 hours, taking my time and also photographing the process for the directions.

Even if you prefer to keep your car original, this is one improvement you can make that will keep your car original in appearance, while giving you better night illumination.

An excellent interior upgrade or restoration item.

7234 - 1984-1987 Turbo Regal -
Analog Dash LED Lights (7) Kit $99.95


NEW PRICE INCREASE

The GM grey shifter handle #6521 is now $39.95. This fits all 1983 to 1987 Turbo Regals with floor shifter in grey.


COMING SOON - ZPaste™

We just received word - the new ZPaste™ based on ZDDP will be available in late July. It will be packaged in a 5/8 ounce packet, which is enough for assembly of your cam and lifters for one rebuild. This new product has been thoroughly tested and is superior to anything that is currently sold nationally in the market place.

The projected retail price will be under $5. So, if you are planning to have your engine rebuilt in the next few weeks, it would pay to hold off until you can get the new ZPaste™ for the cam and lifters assembly.


TOUCH & START®

Our new Touch & Start® Automatic Theft Deterrent Starter Cut-Off System is now in stock.

This system is designed to work on any 12-volt system in a car or truck that does NOT have airbags or a computer chip in the ignition key. It was designed specifically for older cars and trucks, since it has no siren and only one wire in your car gets cut.

This is ideal for a stock original car, and one that does not have power door locks.

This is basically the same system we used to sell in the early 1990s, except this one is more advanced and draws half the current as the old system.

Remember, there is no switch to trigger, it sets automatically within 25-30 seconds after you shut your car off. Even if you left the key in the car, it would not start!

I just installed this system in my personal 1987 Turbo-T over the weekend. If I can do it, anyone can install it.

We have a special introductory price - If you purchase it by 4 pm July 24, 2009, the price is just $71.95. You save $8.

System comes with detailed directions, and a special Buick supplement with step-by-step instructions and photos on how to install it on a 1984-1987 Turbo Regal.

Don't delay. This is just one more way to help to keep your car out of the hands of a thief.

Great for any older car or truck as added security while retaining a factory-original appearance.

Here is our complete product description:

ALL Cars and Trucks - 1987 and Older with a 12-volt System -
TOUCH & START® -
AUTOMATIC THEFT DETERRENT STARTER CUT-OFF SYSTEM

We first offered a similar system in the early 1990s. It was a popular theft deterrent, but was discontinued from the original company. This new system is identical to the original system, just improved.

NOTE - Do NOT install this cut-off system in any vehicle with airbags or one with a computer chip in the ignition key.

This starter cut-off system is the easiest solution and offers all the benefits you want to protect your car. You only cut one wire in your car's existing wire harness.

It sets automatically 25-30 seconds every time you shut off your car, so you do not have to remember to set it. It has a valet mode. There is no annoying siren. It does not matter if you have power door locks or a factory alarm. There is no kill switch for a thief to try and locate. It simply prevents the car from cranking. Even if you left the key in the ignition, it will not start.

Best of all, it will not be visible under the hood or in the interior on any car or truck. This is especially important if you want to retain the appearance of an original car or enter it in car shows. Nothing is visible. Everything is under the dash with the exception of a very small L.E.D. light, which can be mounted anywhere.

The control module is now smaller (3-1/2" long by 1-3/4" wide by 3/4" thick) than the old module. The unique relay inside the control module is designed for the automotive market and draws very little voltage to operate. The old system drew .010 amps when not in use, and this new system draws only .004 amps, less than half. Each unit assembled in the U.S.A. and is pre-tested prior to packaging.

Every unit comes with detailed illustrated directions. We also include separate directions specifically with installation instructions and photos for 1984-1987 Turbo Regals.

Remember, it will work on any 1987 or older car or truck (prior to when vehicles had airbags and a computer chip in the key.)

Another great theft deterrent for any collectible car or truck.

7230 - All Cars and Trucks - 1987 and Older with a 12-volt System -
TOUCH & START® -
Automatic Theft Deterrent Starter Cut-off System $79.95



NOW IN STOCK

1986-1987 Turbo Regal -

PYPES PERFORMANCE (Non-Polished Stainless) DUAL EXHAUST SYSTEMS

This dual exhaust system comes complete with all the hangers and hardware necessary for installation.

This dual exhaust system from PYPES PERFORMANCE. It is an identical format as Hooker's, at a less expensive price.

The pipes are mandrel bend 2-1/2" diameter non-polished 409 stainless steel 16-gauge tubing. It uses Quiet Flow mufflers, which are also non-polished 409 stainless and come with a lifetime warranty to the original owner.

This system has the tapered cut at the end of the pipes. A dual exhaust system will give you some performance gains depending on the other modifications you do to the car. In addition to all these features, both systems are offered at a great price, making them the best buys on the market today.

NOTE - The flat shipping rate, since the box is so heavy.

6996 - 1986-1987 Turbo Regal - PYPES PERFORMANCE (Non-Polished Stainless Steel) Dual Exhaust System
PLUS $45 shipping within continental 48 states - Other areas must call for shipping prices.


SPECIAL SELL OUT

We have the 1986-1987 Turbo Regal - GM Air Flow Duct (from turbo to MAF sensor), Part #6536 in stock for $61.95.


UPCOMING BUICK RELATED EVENTS

NOTE - If you know of a GM or Buick Turbo event, let us know and we can post it in our weekly Turbo Regal Inner Circle so our members are aware of the event.

The best way to stay informed with the upcoming show season is to check out the various Turbo Buick forums.

ZDDPlus™ is also one of the 2 major sponsors for this year's F.A.S.T. events along with Nationals Parts Depot. This is another nationally recognized event that features stock appearing muscle cars. Here is the link to the F.A.S.T. events web site -
www.fastraces.org/members/fastraces/fastraces.nsf/top-menu-items/ghp16


HEMMINGS MUSCLE MACHINES presents MUSCLEPALOOZA X - Englishtown, New Jersey
Labor Day Weekend - Saturday & Sunday, SEPTEMBER 5 & 6, 2009 Old Bridge Township Raceway Park - F.A.S.T. Race Series National Events Sponsored by ZDDPlus™ and National Parts Depot


SOUTHERN BUICK SHOOTOUT 2009 - Reynolds, Georgia -
Friday & Saturday, NOVEMBER 6th & 7th, 2009 -

The Southern Buick Shootout 2009 event at the Silver Dollar Raceway is scheduled for November 6th and 7th, 2009. This event will be open to any and all BUICK, OLDS, PONTIAC cars. The event will include a points race for the TSO and TSM categories, as well as other potential Buick categories.

The plan is to have heads-up / index pacing available for those racers that cannot run in TSM/TSO categories. They also plan to have Gamblers Racing for both Sportsman type cars (no delay boxes allowed) and Top Eliminator (delay Box). The will be Test-N-Tune all day both days. If you have questions, email - sydwyndr@triad.rr.com


EBAY LISTINGS

If you would like to see any Kirban Performance Products items listed on eBay, here is a link to our store and auctions -

http://stores.ebay.com/Kirban-Performance-Products-Inc_W0QQssPageNameZl2QQtZ km


ABOUT OUR EMAILS

Any inquiries concerning used parts, you must email me direct - denniskirban@yahoo.com - I will answer you. However, if I fail to answer you within 24 hours, please email us again. Since expanding into used parts, I get a lot of emails and sometimes I may forget your request or not remember who requested the item.


GOOD NEWS

On the embroidered Grand National travel chairs - I have set up a deal where the company will drop ship them direct to my customers.

If you want to order one of these travel chairs the price is $55, which includes UPS ground shipping to the 48 states. The price for two chairs is $100, which includes UPS ground shipping to the 48 states. Canada, Alaska, Hawaii would be more.

You must email me - direct denniskirban@yahoo.com We prefer Paypal but can take a credit card payment too.

Remember, prices quoted includes shipping to the 48 states. If you need to see a photo first, email me and we can email you a picture.

Currently, we are dismantling a 1985 Grand National and a 1985 T-Type with a tan bucket seat interior. If you are looking for any small parts, send me an email - denniskirban@yahoo.com