Specials  
 

07-06-2016 Inner Circle

07-06-2016 Inner Circle
 
 

Greetings Turbo Regal Inner Circle Members 07-06-2016 -

EXPLAINING THE SPID CODES (TRUNK ID LABEL) continued -

When our cars were new, the critical label was the SPID label. This provided the information to order anything specifically for your car from a dealership.

At some point in the later years, all that information can be found on a dealer’s computer based on your 17-digit VIN number. In recent years I believe GM no longer puts a SPID label on their vehicles. If it has been phased out, I have no idea what year GM stopped using a SPID label.

I can’t find any SPID label in the truck on our 2005 Tahoe. On the other hand, the 2004 Impala I recently sold did have a SPID label. In many of the GM cars that were front-wheel drive from the 1990s, the SPID label was affixed to the spare tire cover.

PHOTO 1 - Here are 2 photos showing the SPID label inside the glove box of a late 1980s / early 1990s S-10 pickup truck. In the photo on the left, not only is the SPID label there, but also the tire info decal as well. In the photo on the right, only the SPID label is attached.

On our cars that decal is on our driver’s door jamb area.

In both of these cases, the decals appear to be identical to the decals used on the 1987 GM cars.

PHOTO 2 - The photo shows the later format SPID label that is identical to the one that was in our 2004 Impala. It measures approximately 3-½ inches wide by 2-½ inches high. It does not have a GM part number on it.

PHOTO 3 - The photo shows an early SPID label from an earlier S10 GM pickup truck. I believe I removed this from the glove box. It shows less than 20 codes.

At some point for some of the 1987 GM models GM began to put a VIN decal on every panel. These were also on tamper-proof paper identical to the VIN door jamb decals GM used. If you own a 1989 Turbo Trans Am, you will see these on every body part. This is one easy way to see if any of the body panels had been replaced. Although they did not appear on the 1987 Regals, they did appear on other GM cars and I believe some of the other 1987 Buick models such as the Riviera.

PHOTO 4 - These 2 photos are of a 1987 Oldsmobile 98 model. The photo on the left shows the inside trunk lid with the SPID label with the VIN decal attached just above it. The photo on the right shows the VIN decal on the actual door.

Again I am not an expert in this field, but at some point it appears GM stopped putting VIN decals on all the body panels. We have a 2012 Chrysler product and that car has the VIN decals on all the original panels. It would appear to me that some car manufacturers may still use the VIN decals. It is very helpful tool for anyone in the used car business. A CarFax alone is not 100% accurate. It’s good to have it, but not one source is 100% foolproof.



TIME FOR A SUMMERTIME MINI CONTEST -

Dealing with the current topic - SPID codes - I am curious to see who among our readers has the fewest codes on their SPID label and also who has the most codes on their SPID label.

The 2 winners will each receive a $50 Letter of Credit against any of our website parts.

Here are the rules that must be followed exactly.

In case of a tie, the earliest email will be the winner for that category.

Your answer must be emailed to me personally - denniskirban@yahoo.com and include a photo of your actual SPID label.

The car must be a 1984-1987 Turbo Regal, which includes the GNX, WE4, and 1987 Turbo Limited models.

At the high end of the count, if you have over 93 or more codes, I would think you would be in the running. At the low end count, if you have less than 52 codes, I would think you would be in the running. For example - our 1987 Turbo-T has just 52 codes.

So submit your photo and information to be a possible winner.

The contest is open to all our customers, but not in a Turbo Regal related business.

The deadline to submit your entry is 6 pm eastern time, Saturday, July 23rd with the winners announced in the July 27th issue.

Actually the winner of each category really has a very rare Turbo Regal no matter if it’s a Grand National or a regular Turbo Regal.

I’m curious if any readers have a 1984-1987 Turbo Regal with 100 codes. Also, I am curious if any owners have one with 45 or less codes on the SPID label.

Good luck all participants.



MORE PROOF IT’S A SMALL WORLD -

As many of our readers know, I go to various You Pull It junkyards on the weekend. Within 50 miles of our location are about 5 or 6 yards, some with as many as 5,000 to 7,000 cars.

I supply other companies with parts and it allows me to do more research for our business. It’s also great exercise since it requires a lot of walking.

This past Saturday I was at one yard that has over 5,000 vehicles and I heard someone yell out my name. Steve Eisenberger from Willow Street, Pennsylvania, a long time customer, just happen to be there also looking for GM parts for another car. He could not believe his eyes. This yard was probably about 40 miles from his house. This is the first time I have run into one of our customers in a You Pull It Yard.



NOTHING SHORT OF AMAZING -

It’s amazing that Clint Eastwood at age 86 just finished directing another movie that will be out this fall. It stars Tom Hanks as Captain Chesley “Sully” Sullenberger. The movie covers one of the most heroic real life deeds in recent memory as Captain Sully put his jet aircraft down in the water safely. I know all 155 passengers and the crew members on that aircraft will be forever grateful for the skill demonstrated by Captain Sully. It was later described as the “Miracle on the Hudson.”

Clint Eastwood has always been one of my favorite actors. In recent years he directing more movies than acting in them.



ON THE NEWSFRONT -

On the news front, the August 2016 issue of Muscle Machines has a 6-page article featuring a low-mileage original GNX.

In the photos that accompany the article, the only minor flaw I saw was in the photo of the radio. It was missing the spun aluminum discs on both knobs.

In the same issue, is an interview with Burt Reynolds. Interesting enough, he owned a GNX back when they were fairly new. We sold him some parts for his GNX and somewhere we have an autographed photo of Burt he sent us at the time.



INTERESTING DISCOVERY -

Once in awhile I will buy a magazine called AutaBuy. It usually runs about 190 pages. It features collectible cars of all types from around the country. Each page has an average of 12 to 15 cars on it. There were maybe a total of 150 pages of cars for sale. I counted fewer than 5 Grand Nationals for sale and just 1 WE4 in the magazine. With an approximate count of 1,500 cars listed for sale, fewer than 5 were Turbo Regals in the issue.



SLAVE CYLINDERS -

Back in the 1960s and 1970s American-made muscle cars never had a slave cylinder format for the 4-speed manual shift cars. However, this was not the case with some of the foreign cars, even going back to the 1960s. I know this firsthand from an unusual experience.

We started our towing business in the summer of 1968 after I ended my three-year stint in the Army that spring. Our first tow truck was a one-ton early 1950s vintage Chevrolet truck with a Manley hand crank. I was young and stronger then.

Our early clients back then were the owners of several major apartment complexes in our area, several of which were around military bases. This was a very good business for us.

I was hired to remove cars that were out of inspection or car that previous tenants had simply left in the parking lot. There was one particular case where the owner had a 1964 Volvo 122 sedan. It was a manual shift car. The owner was disgusted with the car since he said it needed a clutch. The inspection was expired and he knew once I removed it, it would be costly to get the car back.

The car was in very nice condition and I remembered that Volvo had a very good track record for holding up in collisions. I think I paid $50 for the Volvo. Once I got the car home and had it checked out, it turned out the issue was a bad slave cylinder, which is why the clutch did not work!

Eileen used that Volvo for several years. True story!

Later I would also buy a 1964 Volvo 544 model. That is the model that resembled a 1948 Ford. Some of you old timers may recall that years ago Paul Newman had a Turbo Regal engine put into a Volvo wagon. I remember the owner that bought it did get some parts from us at one time. I have no idea where that car is today.



A SOLUTION FOR THE BROKEN POWER ANTENNA continued -

As we stated in last week’s Inner Circle, we have a solution for a broken original GM power antenna. Actually we have two solutions.

To have your power antenna rebuilt, you must first contact Christina at our office - 215-766-1611 x 0 - to place the order with your credit card information.

The total price for the rebuild is just $99.95. This includes return shipping to you to any of the basic 48 states. We will give you a “RO” number (Repair Order) and the address you need to ship your antenna to. It does not get shipped to us! The RO number is proof it has been paid for. This RO number must be on your label on your power antenna. You must attach a label with your name and address to it so you are assured of getting your original power antenna back.

NOTE - Do NOT send any of the bezel parts (metal bezel and plastic bezel under the metal one.) Only send the basic antenna. You must unplug the under-the-hood 3-wire harness (gray, white and green wires) from the antenna. Do NOT cut any of the wires.

NOTE - He will be taking a three-week vacation the end of July and the beginning of August. No shipments can be made during these three weeks. We will post reminders about this as the time draws closer.

We also have a limited supply of original AC Delco power antennas currently being rebuilt by our source. This is part #7703. These rebuilt antennas will have the original-style hex tip on the mast. The price is $149.95, which includes shipping to any of the basic 48 states. You must call Christina at our office 215-766-1611 x 0 to purchase one, as supplies are limited. Currently, we only have a few getting rebuilt. If you call and want a rebuilt antenna, we would not charge your credit card until we can ship it.

One thing we recommend you do prior to any power antenna removal is to purchase the Pete Serio booklet - “1984-1987 Turbo Regal - Power Antenna Removal and Installation Guide,” our part #6976.

Here is a link to these Rebuilding/Rebuilt Power Antennas on our website:
http://www.kirbanperformance.com/products.php?search_text=7702&submit_button=



REBUILT 100% CORRECT 1984-1987 TURBO REGAL POWER ANTENNAS -

As you read this, we have 4 or 5 correct power antennas in route to us. These are completely rebuilt with the correct OEM hex head tip. Since these are totally rebuilt, they are better than original with a steel cable with a plastic outer sleeve.

The price is just $149.95 to your door. You must contact our office to get one of these - 215-766-1611 x 0.

They are superior to the original power antennas and have the unique hex head tip, which is what came on your 1984-1987 Turbo Regal originally.



IMPORTANT NEWS ON REPRODUCTION ALUMINUM DRUMS -

Our shipment of aluminum brake drums came in last Friday and we managed to fulfill all our orders for them before the Holiday weekend.

I am checking with Cardone to find out when they get their next shipment, since we depleted the stock their initial stock between my order and one of our wholesale orders.

Many of you should have them by now or in the next day or so.



OWN A GNX?

We have a limited number of a 35-page booklet that includes much of the background history of the GNX going back to July 1986.

If you are interested, you must email me personally - denniskirban@yahoo.com - for more info and pricing.



CORES NEEDED -

Here is the information on our credits for cores.

We currently need original good 1986-1987 AC Delco mass air flow sensors. We allow $40 Letter of Credit for each correct AC Delco core.

URGENT NEED - TURBO CORES must be the 1986-1987 Turbo Regal stock turbo. They must be complete. We will issue you a $100 Letter of Credit for each acceptable core.

If you ship to us, the post office is the cheapest method. Pack the item(s) with a note with your name, address and phone number.

MAIL - Ship to Address -
ATTN - DENNIS
KIRBAN PERFORMANCE PRODUCTS
PO BOX 1199
PLUMSTEADSVILLE, PA 18949-1199



TECH CALLS -

If you need technical information, it’s best to email - christina@kirbanperformance.com rather than call us.
We will do our best to answer any technical questions within 24 hours.



CAR FOR SALE - 1987 BUICK GRAND NATIONAL -

This 1987 Buick Grand National has the optional factory astro-roof (CF5). It has undergone a complete frame off restoration. The seller has fully documented with photos in a binder. The owner even was able to use brand new original Pallex material on the interior. This is a top-notch Grand National where no expense has been spared. Hundreds of hours went into the bodywork alone. All the glass and interior were totally removed. NOS GM parts were used when possible to make this car like new again. The motor was completely rebuilt and balanced. A new Limit Engineering TA 49 turbo was installed.

All new body mounts. NOS GM taillights and bezels were used along with a NOS GM grille. The bumpers were totally stripped with NOS front and rear bumper strips installed.

Here is a chance to own one completely redone and enjoy it. The seller may take another 1986-1987 Turbo Regal in partial trade. The price is $39,500. This car is exactly as described, show quality from any angle, including underneath.

This Grand National is located about 20 miles from my shop. One of the best restorations you will find of a Grand National.

For more info, email me - denniskirban@yahoo.com



CARS FOR SALE -

From time to time, whenever we spot an unusual or an exceptional car or truck for sale, or one we have for sale, we will put a blurb in our weekly Inner Circle. Also, any cars that our customers have for sale will be featured here and you can see their car with photos on our website. In this category, we will run the descriptions for two-to-three weeks and, if there is no interest in that particular vehicle, it will be deleted the following week. Any new vehicles that we add will appear first, so the oldest listing would be at the end of this section.

If any of these vehicles perk your interest, email me personally - denniskirban@yahoo.com - for more information and photos.



LOCAL CAR FOR SALE -

I spotted this car on the way to work this past Monday. It’s an all-original 1982 Camaro Berlinetta coupe.
A one-owner, original paint, garage kept example with a mere 55,000 miles on it. Car is super straight and clean, grey in color with grey cloth interior V8 powered with bucket seats and a console. Even the fancy optional wheels are like mint.

This is the first year for this model. I have known the seller for many years. He originally bought it for his son but changed his mind.

It is priced very reasonable at just $4,495. This car is over 30 years old and only has 55,000 miles on it. No dents, no rust. It would be a nice car to cruise in or detail for shows with maybe a young new driver in your family.

You can email me for more details and photos - denniskirban@yahoo.com 

The car is maybe 5 minutes from our shop.



TIPS AND IDEAS YOU HAVE TRIED -

If you have a tip or a discovery that you found that works on your Turbo Regal, drop us an email giving us the details so we can pass the info on to our readers. Remember, even with my knowledge, I don’t know it all. Simply email me at - denniskirban@yahoo.com



NEW PRODUCTS FROM US -

1986-1987 Buick Turbo Regal -
Replacement BLACK METAL STOCK BREATHERS (2)

This is one of the key engine parts to keeping your Turbo Regal engine original. This is the black metal breather that came on the front of the passenger’s valve cover. A tube went into the other end that went to the inlet bell on the turbo.

If this breather is neglected, it becomes saturated with oil. Once it is saturated, the oil travels through and down the connecting tube, through the turbo inlet bell, and into the intercooler. The oil can coat the intercooler and the connecting hoses, and eventually gum up the throttle body.

We offer them as a pair, so you will have an extra breather.

Supplies of these original-style black breathers may become limited. Other versions are not black, nor are they metal.

These are identical to what came on your car when it was new.

NOTE - You may also be interested in these related parts - #6848 Rebuilt STOCK Turbo and #6849 UPGRADED TA-49 Turbo

Another great engine restoration item.

6539 - 1986-1987 Buick Turbo Regal -
Replacement Black Metal Stock Breathers (2) - $12.95

Here is a link to these Stock Breathers on the website:
http://www.kirbanperformance.com/product/44309/Replacement+BLACK+METAL+STOCK+BREATHERS+%282%29+%236539.html



1986-1987 Buick Turbo Regal -
Replacement DONUT GASKET FOR DOWNPIPE

This is the donut-style gasket that does between the original downpipe and the factory turbo elbow.

NOTE - You may also be interested in these related parts - #6696 Adjustable Wastegate Actuator, #6952 High-Pressure Adjustable Wastegate Actuator, #6928 Wastegate Tool, #6848 Rebuilt STOCK Turbo, and #6849 UPGRADED TA-49 Turbo.

Another gasket for restoring the exhaust.

7701 - 1986-1987 Buick Turbo Regal -
Replacement Donut Gasket for Downpipe - $12.95

Here is a link to this Donut Gasket for the Downpipe on our website:
http://www.kirbanperformance.com/product/44310/Replacement+DONUT+GASKET+FOR+DOWNPIPE+%237701.html



1984-1987 Buick Turbo Regal -
Replacement 200-4R TRANSMISSION GASKET AND FILTER

If you need to service the 200-4R transmission on a 1984-1987 Buick Turbo Regal, this is the replacement transmission gasket and filter you need.

NOTE - You may also be interested in these related parts - #7208 Replacement Transmission TCC Solenoid, #7486 Electrical Solenoid Pass-through Connector with O-ring for 200-4R Transmission, #7686 Replacement Transmission Rear Seal for 200, 200R, 350 and 700 Transmission, and #7154 The 200-4R Super Servo Kit.

Another great transmission restoration item.

7699 - 1984-1987 Buick Turbo Regal -
Replacement 400-4R Transmission Gasket and Filter - $34.95

Here is a link to this Transmission Gasket and Filter on our website:
http://www.kirbanperformance.com/product/44308/Replacement+200+4R+TRANSMISSION+GASKET+AND+FILTER+%237699.html



1978-1988 All G-Body (Including Buick Turbo Regal) -
Reproduction STEERING COLUMN GASKET SEAL TO THE FIREWALL

If you are doing a restoration under the hood, here is an exact reproduction of the steering column gasket to the firewall.

If you have to replace the steering column, you will need this gasket, since the original gasket is probably no good anymore.

This gasket also can prevent any water from leaking into the interior when you wash your car.

Another good reproduction seal made by the same source for most of the other gaskets we offer.

NOTE - You may also be interested in these related parts - #7572 Reproduction Upgraded Upper Steering Column Bearing Kit, #7573 Reproduction Lower Steering Column Shaft, #7574 Upgraded Refurbished Used Lower Steering Shaft, and #7380 Rebuilt Power Steering Gear Box.

7724 - 1978-1988 ALL G-BODY (Including Buick Turbo Regal) - Reproduction Steering Column Gasket Seal to the Firewall - $6.95

Here is a link to this Gasket Seal on our website:
http://www.kirbanperformance.com/product/44307/Reproduction+STEERING+COLUMN+GASKET+SEAL+TO+THE+FIREWALL+%237724.html



1984-1985 BUICK TURBO REGAL
CONVERSION KIT TO A 1986-1987 TURBO REGAL IGNITION SYSTEM

This conversion kit enables you to switch a 1984-1985 ignition system to the later 1986-1987 Turbo Regal ignition system.
In most cases, the 1984-1985 Turbo Regal ignition parts are no longer available.

Kit comes complete with directions. No wires get cut. It’s an all plug-and-play conversion kit.

The metal bracket allows you to bolt the 1986-1987 coil module in place of the original 1984-1985 coil module.

NOTE - You may also be interested in these related parts - #7637 AC Delco Coil Pack and #7639 Aftermarket Ignition Module.

7722 - 1984-1985 Buick Turbo Regal Conversion Kit to a 1986-1987 Turbo Regal Ignition System.

Here is a link to the Conversion Kit on our website:
http://www.kirbanperformance.com/product/44306/CONVERSION+KIT+TO+A+1986-1987+TURBO+REGAL+IGNITION+SYSTEM+%237722.html



1984-1987 BUICK TURBO REGAL
CCCI (Computer Controlled Coil Ignition) SensorCheck MODULE

Important notice Caspers is currently out of this part and is awaiting parts. We don’t expect to have any available until the end of July at the earliest. The demand for this part has been more than he anticipated.

The Computer Controlled Coil Ignition (CCCI) is probably the least-understood system on your Turbo Buick powered vehicle. The most common problem is the “No-Start” condition, and there are very few tests that a car owner is capable of performing to determine a faulty component in this system.

This simple CCCI SensorCheck Module plug-and-play diagnostic tool is designed to troubleshoot your ignition system for the most common “No-Start” scenario. Specifically, it will display a simple LED to indicate the status of the CAM sensor, CRANK sensor, Coil Power and MODULE power. The CAM LED will visibly blink rapidly during idle. The CRANK LED will appear to be continuously on (due to the rapid Crank signal) when the vehicle is running normally. The POWER LED will be illuminated when the MODULE fuse is working. There are 3 LED’s assigned to each model: “HOT AIR” (1984-1985) and Intercooled (1986-1989.)

It can also be used to set the cam sensor!
No CAM signal = No Spark, No Injector pulse
No CRANK signal = No Spark, Only Inj pulse
CAM signal initiates sequential spark. Without it, No spark.
CRANK signal initiates fuel injector pulses.
No Lights, good fuses = Check ECM ground return wire.

This clever device eliminates any guesswork as to why your Turbo Regal won’t start, if it’s related to the cam sensor, crank sensor, coil pack, or coil module.

It comes with easy-to-follow directions. It is all plug-and-play to conduct the tests to determine where the problem is originating. By using LED lights, you can pinpoint where the problem originates.

By a flip of a switch, it works on all 1984 to 1987 Turbo Regals including, the 1989 Turbo Trans Am.

A must-have tool that saves the guesswork when you have a no start situation.

7723 - 1984-1987 Buick Turbo Regal -
CCCI (Computer Controlled Coil Ignition) SensorCheck Module - $129.95

Here is a link to this SensorCheck Module on our website:
http://www.kirbanperformance.com/product/44305/CCCI+%28Computer+Controlled+Coil+Ignition%29+SensorCheck+MODULE+%237723.html



ALWAYS LOOKING FOR IDEAS -

If you have any product ideas that would fit our Turbo Buick market that you would like to see available, email me direct -denniskirban@yahoo.com



ALWAYS IN A BUYING POSITION FOR TURBO REGAL PARTS -
 
Got any Turbo Buick parts you are not using? Why not cash them in for parts you need with a Letter of Credit. Simply email me a list - denniskirban@yahoo.com. Also, we are still buying dead or partially dead 1984-1987 Turbo Regals under $4,000 that are within 250 to 350 miles of our location.



NOTE - ABOUT LINKS IN THE INNER CIRCLE -

We have heard from a couple people that have had problems with the links in our Inner Circle.
 
When we check the links, they work fine. However, if you are not able to be directed to the exact website page or internet site, you can "copy" and "paste" the link into the URL in your browser (such as Safari, Firefox, Internet Explorer, Google Chrome, etc.) If it doesn't link in one browser, it may work in another.
 
Most people having problems are using Internet Explorer… If you are having issues with links, try another browser to see if it works.
 
You may need to "UPDATE" your browser to be use you are using the current version.



NOTE ABOUT PHOTOS ON THE WEBSITE -

We have heard from a couple people that have viewed the photos on the website. Because these have to be low-resolution photos to work on the Inner Circle segments on the website, any photos of text don't appear clear when enlarged. This is a problem when you are trying to see numbers, such as those on the VIN labels or pages from Options booklet. Also, because of photo reproduction and computer screen variations, the colors may not be true to the actual product or photo.

If you would like to have us email you any photo at the higher resolution for viewing, just email us and we will email them to you. Be sure to be specific on which pictures you want to see - Reference Inner Circle date and photo number 1, 2, 3 or 4 - denniskirban@yahoo.com



2016 CALENDAR OF EVENTS -

TWO HUGE LOCAL CAR SHOW TO US -

Moravian Tile Works, 313 and Cold Spring Creamy Road, Doylestown, PA - Sunday, July 10th, 2016

One of the largest car shows in our area is being held Sunday July 10th at the nearby Moravian Tile Works located at 313 and Cold Spring Creamy Road in nearby Doylestown, PA. Unfortunately, no cars newer than 1986 can participate. This event weather permitting attracts 300 to 500 cars each year.
It is a beautiful setting for a car show. I go every year as a spectator and see some of my old time friends.

On Saturday, July 16th from 5 pm until 10 pm the annual Doylestown Classic Car Show takes place. This event attracts several hundred cars and trucks of all types and is set up on several of the major streets in Doylestown. Free to the public and includes live music and various vendors. I usually attend this event as a spectator.


BCA NATIONALS - July 27th-30th, 2016

The BCA Nationals, which stands for Buick Club of America, is actually coming to Allentown, PA July 27th thru the 30th. Allentown is about 25 minutes from where we live.

The big car show day is Saturday, July 30th. They expect over 1,000 Buicks of all kinds. We plan to attend this event on Saturday as a spectator. If you live anywhere near Allentown this is a rare chance to attend a Buick National event. We will be meeting several of our customers at this event

Sometimes we forget that our niche market has a parent national club. For more exact details and location, go to their website - www.buickclub.org/2016anniversary


GS NATIONALS - September 14th-17th, 2016 -
Beach Bend Raceway in Bowling Green, Kentucky

See the GSXtra for more details, or their website - gsnationals.com


EAST COAST BUICK REGIONALS - September 16th-17th, 2016 at Cecil County Dragway in Rising Sun, Maryland

Event includes a judged car show on Saturday open to all Buick makes and anything Buick powered. Free Vending. Saturday race classes must be Buick powered. For more information, contact - johncsordas@optonline.net or phillyturbosix@comcast.net

NOTE - This is not a misprint. Both the GS Nationals and East Coast Buick Regionals fall on the same weekend.



ABOUT OUR EMAILS -

Any inquiries concerning used parts, you must email me direct - denniskirban@yahoo.com - I will answer you. However, if I fail to answer you within 24 hours, please email us again. Since expanding into used parts, I get a lot of emails and sometimes I may forget your request or may not remember who requested the item.



IN CLOSING -

Hope everyone had a safe and enjoyable 4th of July.

Remember check your SPID label - you could be a winner in our contest!