Greetings Turbo Regal Inner Circle Members - 08-04-10 -
BUICK LITERATURE - PART 4
One interesting fact about our Turbo Regals - the entire production was done at the same plant for 1985 through 1987 model years. They started in Flint, also known as Buick City, and the final assembly took place down the road in nearby Pontiac, Michigan. That explains the letter "P" which is the 11th digit in your VIN number. The 11th digit is the code for the plant your car was built in. Back then GM had about a dozen plants.
However, for the model year 1984, the 11th digit for the plant assembly code should read "H." My chart shows the "H" code stood for Flint, Michigan. If that is the case, I assume the 1984s were all built in Flint, which included the final assembly.
PHOTO 1 - Shows first an original 1984 Service Parts Identification label or trunk ID label, and the one below it is for a 1985 Turbo Regal. (We have blacked out the last digits of the VIN numbers.) If you look closely and find the "W" codes you will see the code "WE2" for both of these, which means both were Grand Nationals. Notice how the format of 1984 Service Parts identification label appears slightly different from the 1985 label.
The other major difference between the two labels is on the 1984 label the codes run in alphabetical order across. On the 1985 label they run down each column in alphabetical order. That 1985 system remained in effect for 1986 and 1987 as well.
Please keep in mind my knowledge of the 1984 and 1985 Turbo Regals is quite limited compared to what I know about the 1986 and 1987 Turbo Regal models. The labels we are posting are coming of cars we have recently dismantled.
From what I recall about the Pontiac GTOs (1964-1974), these cars were produced at 13 different plants throughout the USA. It stands to reason, because GTOs were made at 13 different plants, GTO owners probably see subtle differences between cars produced at different assembly plants.
After the "P" code in your Turbo Regal VIN number, there are 6 remaining digits. These last 6 digits relate to your sequence production number. Example; for all 1987 models, the first digit is a 4. In looking at the 1986 trunk ID label we featured last week, the first digit after the "P" digit is a 2.
In looking at a 1985 trunk ID label, the first digit after the "P" digit code is the number 4.
For the 1984 trunk ID label, the first digit after the "H" code is the number 6.
As a Turbo Regal owner for any of these years (1984-1987), we are quite fortunate that GM started the Service Parts Identification labels format. I think this started with the 1984 model year. I canâ€™t say for certain it was used on all 1984 models, but they were used on our Buicks.
Speaking of the rare 1984 Grand Nationals. We had a visit Saturday from Phil Errett, who lives in Ontario, Canada. Phil has been a customer of ours since 1988 when he bought his 1984 Grand National. He stopped in to pick up a hood pad, which we had saved for him off a 1984 Turbo Regal. Phil has spent years restoring his 1984 Grand National and has over 180,000 miles of "seat time" behind the wheel. He went with me to the Hatboro Car Show and another car show in Doylestown on Saturday night.
Of course, Phil's car has the highly-sought after Lear Siegler seats and the optional touch climate control. The early Turbo Regals (1984-1985) had some unique features that never appeared in the 1986-1987 Turbo Regals. Some of these would be the radio options. Phil's car had the factory am/fm cassette radio with clock. The code for this radio is "UU7."
PHOTO 2 - Shows the factory radio in Phil's 1984 Grand National. Notice on the cassette door to the left - it has an illustration of a cassette and only a single button under the cassette cartridge. Visible above it is the touch climate control that was an option in 1984-1985-1986 only. The second photo shows the original chart for all 1984 Buick radios. To the far left would be the code assigned to each feature and the Buick models are listed across the top. The radio shown at the top is "UU6," which was the top-of-the-line radio and cost more money than the "UU7." This seems strange, since logically you would think the higher number code would have been the better radio and would cost more!
Watch for Part 5 next week!
NOTE ABOUT PHOTOS ON THE WEBSITE - We have heard from a couple people that have viewed the photos on the website. Because these have to be low resolution photos to work on the Inner Circle segments on the website, any photos of text doesn't appear clear when enlarged. This is a problem when you are trying to see numbers, such as those on the VIN labels or pages from Options booklet.
If you would like to have us email you any photo at the higher resolution for viewing, just email us and we will email them to you. Be sure to be specific on which ones you want to see - Reference Inner Circle date and photo number 1, 2, 3 or 4 - email@example.com
ANOTHER KEEPSAKE FOR TURBO OWNERS -
Another item you may have gotten from the seller with your Turbo Regal would be a set of keys with the punch outs still with them and the ID tag showing the year and stock number for the car.
PHOTO 3 - Shows 2 versions of keys from my private collection. Set of 2 keys on the left has 4 of the punch outs from the keys and the manilla colored "BUICK" tag label still attached. The set on the right has 2 keys and 2 key punch outs with the yellow tag reading, "1987 Gr Nat'l 2 dr black Stock Number 9677."
This reminds me of something attached to my main key ring I carry every day. It is one of my Army dog tags from 1966-1970.
ANOTHER TRIP DOWN MEMORY LANE PART 4 -
In the early 1970s, we rented a huge house that had a 6-bay garage. In addition to living there, we also ran our printing business and towing business from the property. We also rented 2 garages from our elderly neighbor, who did not even own a car. There were certain well-known muscle cars in our area, which made an impression on me. One of the better-known cars locally was a bright red 1962 Super Sport 4-speed with the highly-desirable 409. Painted in white lettering on the front fenders were the words, "Get-around." He bought the car brand new and raced it frequently at the nearby dragstrips. The car was his baby.
The owner, Ron was a little older than me, so it wasn't until the early 1970s that we got to know each other. He operated a garage and also sold cars from his lot. At the time, I would do some towing for him. He also knew a lot of the same guys I knew. Our house was maybe 1/2 mile from his shop. He knew I had lots of garage space and asked about storing his 409 Chevy for him.
So, for about a year, we stored his precious 409 Chevy until we moved up to our house in Furlong. Eventually we sold our towing business. I remember hearing back in the mid-1990s that he died of a massive heart attack. In all these years, I never saw his car again or heard what happened to it after he died.
This past Saturday I went to the Hatboro show that we mentioned in last week's Inner Circle. I was amazed to actually see Ron's car, complete with the white lettering on the front fender "Get-around" on display at the show. The car looked just like I remembered it when it sat in one of our garages in the early 1970s. His wife was there and I talked to her. Ron was only 51 years young when he passed away in 1995. It turns out she kept the car until a year ago, since it held so many memories for her.
The new owner is basically a caretaker for the car. While I was talking to her, I was amazed at how many people stopped and looked at the car and remembered the days gone by and what memories it invoked for them.
She told me he always took it to his high school reunions. This car was made even more famous when the Beach Boys had their hit record "409."
PHOTO 4 - Shows Ron's 1962 409 Chevy as it looks today and a close up of the front fender.
FOLLOW-UP TO OUR AUTOMOBILE QUARTERLY FIREBIRD POSTER STORY -
Here's another quick follow-up story. This past week we received an email from Clem Sousa, a long-time GTO and Buick customer. He has both of the Automobile Quarterly posters; the Firebird and the GTO posters that we referred to 07-21-10 Inner Circle.
Clem actually came to our house in the mid 1980s with his then girlfriend Renee. When they did, they stopped on our street (Sugar Bottom Road) and took a photo of Renee in front of the same barn the Judge GTO was photographed in that poster. Renee later became his wife!
JUST IN - RADIATOR OVERFLOW BOTTLES - JUST A FEW IN STOCK -
We were able to obtain 3 of the correct original GM radiator overflow bottles. These have been extremely difficult to get. Price is $55 and $10 shipping. You must call our office (215-766-1611 x 0) to order, since we only have 3 to sell. It has taken us several weeks just to get these few in stock.
BREAKING NEWS - BREAKING NEWS - TODAY! - HEADER PROJECT UPDATE -
GREAT NEWS - The stock style 1986-1987 headers are now ready to ship. Mike at TA Performance has put a set on a stock car with no fit problems.
Kits will be dropped shipped from Arizona, so shipping/handling will range from $20 to $35.
Be sure to contact our office now to get one of these first sets - 215-766-1611 x 0.
We also have access to a limited number of just the driver's header for those of you that need to replace that header.
Here is the link to these headers on the web site -
1986-1987 Turbo Regal -
STOCK REPLACEMENT DRIVER'S SIDE & PASSENGER'S SIDE
409 STAINLESS STEEL HEADERS WITH CROSSOVER PIPE KITS
These stock replacement headers are made in the USA and come 100% complete with hardware and special carbon graphic steel core high-temperature gaskets. Headers are made from 409 stainless steel and Tig welded.
The ports are laser cut and will fit all stock, TA heads, and Champion heads. The turbo flange is also the same precision cut 3/8" thick piece currently on TA headers with elongated hole for precise turbo/downpipe alignment.
All fabrication, materials and production are 100% made in the USA.
TA Performance has long been a well-respected source for Buick hard core parts for both V8 and also V6 Turbo Regals for over 25 years.
The complete kit includes the 1986-1987 Turbo Regal 409 stainless driver's side and passenger's side header setup with crossover pipe, hardware, and gaskets.
We are also offering the stock replacement driver's side header alone, similar in design to the now defunct Poston-style header.
An excellent upgrade to replace the original or Poston-style headers on any 1986-1987 Turbo Regal.
7273 - 1986-1987 Turbo Regal -
Stock Replacement Driver's Side 409 Stainless Steel Header Kit - $325 / kit
NOTE - Includes hardware and gasket
7274 - 1986-1987 Turbo Regal -
Stock Replacement Driver's Side and Passenger's Side Complete 409 Stainless Steel Headers Kit $699.95 / kit
NOTE - Includes driver's side and passenger's side headers with a 2-piece crossover pipe, hardware and gaskets.
CALL TO ORDER & FOR FINAL SHIPPING - IN STOCK
Supplies are limited for this first shipment. So, if you want one of these first sets, call our office NOW - 215-766-1611.
Remember, these are made from 409 stainless, which cost a little more for material over steel. TA Performance has a long history for making quality parts and that is why we went with their program.
GREAT NEWS - GNX STYLE WHEELS BACK IN STOCK -
We just received news that the GNX-style wheels are now in stock! We have only been able to get a few sets for over a year. If you are interested, call our office - 215-766-1611.
Here's a link to these wheels on our website -
Here's complete information about these impressive wheels.
1984-1987 Regal -
GNX - TRANS AM STYLE 16" x 8
These GNX - TRANS AM style wheels have the black mesh center and are 16" x 8" with the proper offset to fit the 1984-1987 Regals. These resemble the popular original GNX wheels. Do not confuse this with the version we have sold in the past, known as "Kirban-Style" GNX wheels.
These wheels are manufactured with brand new tooling and are clearcoated. Wheels have the proper offset to fit under your fenders. We sell these as a complete set of 4 wheels, 20 correct lug nuts, 20 lug nut black caps, 4 chrome-plated valve stems, 4 black center caps, and 4 "TURBOCHARGED" center cap decals.
The original center caps on the original GNX were actually the existing Trans Am caps. GM simply affixed the "GNX" paper decal over the Trans Am medallion. This set includes the "TURBOCHARGED" Decals (4) Set, Part #7113.
If you own a 1984, 1985, or 1986 Turbo Regal the GM front springs on these years were a different spring rate. You will need to change the front springs to avoid having the tires rub when you go over bumps. We recommend our front springs, Part #6566. If you plan on carrying heavy items in the trunk or four friends, we recommend you upgrade the rear springs to our variable rate rear springs, Part #1520 on any 1984, 1985, 1986, 1987 Regal.
For shocks the best ones you can buy are the Bilsteins to further improve the ride quality of your Turbo Regal. The overall height is actually slightly less than what is currently on the car. The speedometer is not affected.
Originally the GNX used 245/50s by 16s up front and 255/50s by 16 in the rear. For best results, we recommend going with 245/50s on the fronts and the backs. Depending on the year Turbo Regal and what suspension upgrades you have made, we do not recommend the larger 255/50s for the rear. However, if you want to go with 255/50s in the rear, trial fit these wheels first to be sure you have enough clearance.
The good news is these wheels will look pretty much dead on with the mesh black center that matches the original GNX mesh center. They are 100% brand new and weigh about 18 lbs each. Of all the available optional wheels, these are the most desirable and can really enhance your pride and joy.
Keep in mind, we will take good used original Grand National wheels in partial trade. This can help save you some money, since you also need to buy new tires.
Wheels are dropped shipped from California. We would send your receipt, 20 lug nuts, 4 center caps, 4 wheel decals, and 4 valve stems direct from our Pennsylvania location. Shipping is calculated from California, generally costs about $65-$125.
BEFORE PLACING YOUR ORDER ONLINE, CALL FOR SHIPPING.
7219 - 1984-1987 Regal - GNX - TRANS AM STYLE 16" x 8" Wheels Set $955 + shipping
NOTE - Set includes 4 wheels, 20 correct lug nuts, 20 lug nut black caps, 4 chrome-plated valve stems, 4 black center caps, and 4 "TURBOCHARGED" center cap decals.
NOTE - Shipping costs generally run $65 to $125, depending on your location.
BEFORE PLACING YOUR ORDER ONLINE, CALL FOR SHIPPING.
URGENT REQUEST - WE NEED TURBO CORES! -
We need stock 1986-1987 Turbo Regal turbos for cores.
For each complete turbo you send us, you will received either a check for $75 for or a Letter of Credit for $100 for any parts listed on our website. Just specify which you want for your turbo.
By sending us complete cores, it enables us to supply other owners with rebuilt units and also our TA 49 versions. The TA 49 turbos we sell require the use of the stock exhaust housing. By using that section, no low-end torque is lost in regular street driving.
THANK YOU for helping to keep the parts available for other Turbo Regal owners.
NEW PART FROM US - LINDA VAUGHN "MISS HURST" STANDUP -
We now have the Linda Vaughn "Miss Hurst" autographed 24" stand-up replica available. Each comes with a Certificate of Authenticity, Part #7265, $52.95. Miss Hurst, as everyone knows, is one of the best-known icons from the muscle car era. This is reminiscent of the popular original 57" stand-up display, famous from the mid-1960s.
Here is the full description -
LINDA VAUGHN - MISS HURST - AUTOGRAPHED 24" STAND-UP REPLICA -
and CERTIFICATE OF AUTHENTICITY
First time ever offered! The most recognized icon stand-up display from the muscle car era - Miss Hurst - Linda Vaughn
Car enthusiasts will be thrilled to have this stand-up replica of one of the most highly collectible and most recognized printed display - MISS HURST. This is reminiscent of the popular original 57" stand-up display, famous from the mid-1960s.
This gorgeous replica is now available in a limited production (only 7,500 will be available) 24" tall stand-up personally autographed by Linda Vaughn. Each stand-up is printed in the U.S.A., is diecut around Linda (no black background), and comes with a foldout stand affixed to the back so it will stand alone.
Autograph reads, "Linda Vaughn - Miss Hurst."
My wife actually worked with Linda at Hurst back in their PR department in the late 1960s. Fortunately, we've kept in touch over the years. We are known for our very rare collection of Hurst memorabilia items and original Hurst artwork. Hurst Performance was the most recognized shifter company during the 1960s and 1970s.
Linda Vaughn has always been recognized as "Miss Hurst" and "Miss Hurst Golden Shifter." Even today, her public appearances always draw a crowd.
Now you can own your own collectible stand-up. Each comes with a color Certificate of Authenticity complete with a photo of her signing the stand-up.
An excellent collectible for any car enthusiast, sure to bring back fond memories of the muscle car era! This is a perfect addition for a desk, car display or for your garage or den. It also makes a great gift for any car nut or mechanic.
PART #7265 - Linda Vaughn - Miss Hurst -
Autographed 24" Stand-up Replica and Certificate of Authenticity $52.95
Here is a link to this Linda Vaughn Stand-up on the website -
ALWAYS IN A BUYING POSITION WORKS -
Got any Turbo parts you are not using? Why not cash them in for parts you need with a Letter of Credit. Simply email me a list - firstname.lastname@example.org -
Also we are still buying dead or partially dead 1984-1987 Turbo Regals under $4,000 that are within 250 to 350 miles of our location.
UPDATE ON THAT RARE SILVER ARROW RIVIERA -
This car sold last week locally for under $6,000.
GM PARTS UPDATE -
It appears that the GM supply of the factory 1986-1987 GM factory original molded boost line kits are dwindling and may already have disappeared from GM's warehouses inventory. We currently have a decent supply of them.
This is a very critical part, for any 1986-1987 Turbo Regal, since it is needed to control boost. They have 3 specially formed hoses with a special size diameter T in between two of the molded hoses. These also have the GM wording on them.
Over a period of time, heat can cause the hoses to swell and crack. While they last, we have them available for $44.95 plus shipping, Part #6644. Supplies are limited.
Here is a link to the Boost Line Kit on our web site -
KIRBAN PERFORMANCE CLOSE-OUT PARTS -
We have the 1986-1987 Turbo Regal - GM Air Flow Duct (from turbo to MAF sensor), Part #6536 in stock for $61.95. Just a few left now.
We still have a few brand new GM right hand side marker lights with the blackout package. This is the marker light that attaches to the side of the headlight bezels. Price is $61.95 plus shipping.
If you are interested in any of these parts, you must call our office to purchase it. Some of these close out items are just about gone from the GM parts system.
CALENDER OF EVENTS -
2010 UPCOMING BUICK RELATED EVENTS -
NOTE - If you know of a GM or Buick Turbo event for this year, let us know and we can post it in our weekly Turbo Regal Inner Circle so our members are aware of the event.
The best way to stay informed with the show season is to check out the various Turbo Buick forums.
BACK TO THE BRICKS CRUISE WEEKEND -
AUGUST 17, 18, 19, 20 & 21 - 2010
Downtown - Flint, Michigan
We received an email asking us to let you know about a special invitation to visit Doc Watson's (CEO and President of the Hurst Performance Vehicles) party at his office. The "First Lady of Racing," Linda Vaughn and George Barris (custom car builders) will be there.
Here is a link to information about this event -
CHICAGOLAND CHAPTER BUICK GS CLUB OF AMERICA
13th ANNUAL MIDWEST BUICK CHALLENGE -
AUGUST 20, 21 & 22, 2010 - Osceola, Indiana
Osceola Dragway, 56328 Ash Road, Osceola, IN
For more information, go to their website -
21st ANNUAL BUICK PERFORMANCE WEEKEND -
ALL BUICK QUICK 16 - MUSCLEPALOOZA XII - CAR SHOWS
SEPTEMBER 4th & 5th, 2010 - Gates Open Noon Saturday - 8 am Sunday, Old Bridge Township Raceway Park, Englishtown, NJ.
For more information, call - 732-446-7800 or 845-528-GSGN (ask for John).
I plan to attend this event on Saturday September 4th setting up in the Buick portion of the car show as a vendor. We would have ZDDPlus™ there as well as used Turbo Regal parts.
11th ANNUAL PONTIAC AND BUICK CAR SHOW
Sunday - SEPTEMBER 19th, 2010 - 10 am - 3 pm - Rain or Shine.
Star Pontiac, Buick GMC - 260 Country Club Road, Easton, PA 18045
Music, food and drinks, dash plaques, awards, door prizes.
For more information, go to their website -
or email - email@example.com
EAST COAST BUICK REGIONALS AND FAST (factory appearing stock tire) EVENT
ALL BUICK JUDGED CAR SHOW SATURDAY THE 2ND HOSTED BY MAGNA (Mid-Atlantic Grand National Association)
The car show is open to all Buick's from 1965 to 2003. Goodie bags, 50/50 and other prizes for show cars!
OCTOBER 1st and 2nd, 2010 - FRIDAY and SATURDAY Gates open 9AM
Cecil County Dragway, Maryland
This is their 14th annual event! - Free vending.
For more information, contact Doug Dougherty at 302-653-2201 or
John Csordas at 845-528-GSGN.
NOTE - Dates are Friday and Saturday!
or email - firstname.lastname@example.org - or - email@example.com - or - firstname.lastname@example.org
5th ANNUAL OKTOBERFEST - ALL GM SHOW
OCTOBER 2nd, 2010.
Silver Springs, Ocala, Florida
For more information, go to their website -
30th ANNUAL GS NATIONALS - Beech Bend Raceway, Bowling Green, Kentucky
OCTOBER 20th-23rd, 2010
This has been rescheduled from the cancelled May dates. Unfortunately, Don Garlits will not be able to attend as the dates conflict with an event he does at his Museum in Ocala. Florida. For more information, including registration and vendor details, go to their website and then click on GS Nationals - http://www.gsnationals.com
EBAY LISTINGS -
If you would like to see any of the Kirban Performance Products items listed on eBay, here is a link to our store and auctions -
ABOUT OUR EMAILS -
Any inquiries concerning used parts, you must email me direct - email@example.com - I will answer you. However, if I fail to answer you within 24 hours, please email us again. Since expanding into used parts, I get a lot of emails and sometimes I may forget your request or not remember who requested the item.
IN CLOSING -
Remember, call our office if you want to purchase the new TA stock appearing header set from this first shipment currently IN STOCK.