Specials  
 

10-03-2018 Inner Circle

10-03-2018 Inner Circle
 
 

Greetings Turbo Regal Inner Circle Members 10-03-2018 –

WE ARE CLOSED THIS FRIDAY – OCTOBER 5TH –

Due to a death in our family, our office will be closed this Friday, October 5th. NOTE - No orders will be shipped on Friday.



INTERNET ISSUES AT HOME –

This past week we been having internet issues on our home computers so I have not been able to respond to any emails or post anything from home after work.

My plan is to attend Fall Carlisle one day this week. This would be the first year that I have not attended any previous Carlisle events for 2018.



BREAKING NEWS - BODY BUSHING KITS NOW AVAILABLE AGAIN -

Our supplier now has them in stock and we have an initial order of them coming in a few days. The part number is #7305 for $249.95. Remember to order the bolt kit as well, part number #6974 as they are special grade 8 bolts in the proper lengths to do the install.



1978-1987 BUICK REGAL CORE SUPPORT REPRODUCTION BUSHING KIT –

One of our constant sellers over the years has been the reproduction core support bushing kit, part #7304. This is a separate kit and is not part of any of the body bushing/cushion kits. Even other companies market this by itself. It was not considered a body bushing since it secures the actual core support.

If you were to view this on your Turbo Regal you could probably see how it is possible the body of the car is not still seated on the frame exactly square. This is one indication. Another indication becomes evident if you go with larger wheels and tires in the rear. Here you would clearly see where one tire sidewall would be slightly closer to the side of the frame than the other side. Another clear way of seeing this is to purchase and install a pair of the GNX body bushing. The GNX bushing seats into a hole at the top of your frame and the pointed top seats into the body. If that angle is off even just slightly you can’t properly install the GNX bushing.

The longer you delay in doing these bushings the more difficult it can be to install them and the more the body and frame may not be in near perfect alignment.

PHOTO 1 – The photo on the left shows a very clear picture of just have crushed and kinked this critical bushing can get after 30 or more years. The photo on the right shows the complete reproduction core support bushing kit which includes everything you need.



THOM SANSOUCIE AUTO SERIES LIMITED EDITION TURBO REGAL ART –

We have just one of the 24” by 36” Turbo Regal art prints available, part #7203. It is number 599 of 2000 produced. The normal retail price is $159.95 plus shipping. We are discontinuing this art print and also small one, part #7202.

This makes a nice gift for that Turbo Regal owner. The special price on this last print we have is $139.95 and just $12 shipping to the basic 48 states. You must call our office to order this – 215-766-1611 x 0. We only have this one print!

We also have on a piece of acrylic a picture of a 1966 GTO. I bought this several years ago at Carlisle. It measures approximately 15” by 20”. It is based on the box cover of the 1966 GTO slot car. That slot car has a value today of about $500 if you got one unbuilt in the original box. (I have one in my private collection). Either item makes for a nice unique gift.




PHOTO 2 – The photo to the left shows this 24” by 36” Limited Edition print #599 of just 2000 produced. Buy it now for just $139.95 plus $12 shipping. The photo to the right shows the 1966 GTO slot car box cover that was produced on acrylic. I bought this year’s ago at Carlisle. This is pretty neat looking. It measures approximately 15 inches by 20 inches. It is probably pretty rare. The price is $39.95 plus $12 shipping to the basic 48 states. To order either item you must call our office phone 215-766-1611X0 and ask for Christina. Remember I only have one of each available!



HISTORY OF THE ADJUSTABLE FUEL REGULATOR –

Adjusting fuel pressure over the years has gone under many changes since the cars were new. In the beginning one of the popular modifications was to simply crush toe top half of the factory fuel regulator. This simply produced a onetime adjustment and could lead to leaks! Another early method was to thread the vacuum port and install an allen head screw in the vacuum port to make the adjustment. This format proved to be inefficient as the set screw would not stay secured at a specific setting.

Around 1999 according to my old catalogs our supplier came up with cutting the top half off the factory fuel regulator and installing a billet top complete with the vacuum port and an adjustment allen screw in the center of the top. This proved to be very efficient and we sold them until 2001. Several companies used this format with the difference being the location of the vacuum port.

In 2001 because of the vast huge number of regulators we were getting produced for the Turbo Regals and Mustang 5.0s our supplier started to make the entire fuel pressure regulator from scratch. For the Turbo Regals and Mustangs he made the designs look identical to the stock fuel pressure regulator. We felt this was critical at least for the Mustangs since it sits under the intake manifold and it was critical that owners would not have any fit issues with various intakes. That design has proven successful now for over 17 years. It is hard to pinpoint who or what company was first to make a marketable adjustable fuel regulator for the Turbo Regals, I am confident in saying the billet design we market is the most popular among owners and most recognized today.

Here is the link to our website for more information on our billet adjustable fuel pressure regulator, part #6547.

PHOTO 3 – The photo to the left shows our popular early design adjustable fuel regulator that is probably over 18 years old and still in use! The photo to the right shows the later design that we introduced around 2001 and is still being produced today. Note this one pictured has been highly polished.



GENERAL MOTORS PARTS PUBLICATION REFERENCE CATALOG –

One of the rare GM books I have is dated January 1993. It is the last printing as future editions will only appear in microfiche and electronic format. One of the chapters in this informative book covers the SPID label. It breaks down a typical SPID label explaining how each group of codes refers to a specific option.

Two things I found interesting about that chapter is the SPID label they use as an illustration is the early 1985-1986 one #14065987 rather than the later one. The other thing of note is it alerts collision shops to exercise care when replacing a panel that requires the SPID label to be removed and reinstalled on a replacement panel. It also clearly states “Replacement SPID labels are not available. In other words even back when these cars were new GM did not offer replacement SPID labels. That may explain why later GM cars the SPID label were affixed in many cases on the spare tire cover. In GM trucks it was attached inside the glove box.

Again this is just my assumption to the possible answers as to why the location of the SPID label changed in later years.

This book even contains a chapter listing every OEM carburetor number with its reman replacement number! Another chapter lists all the RPO numbers for the options and what GM division had that option.

Again this is just one of the several books I bought years ago at various swap meets that gives verification for some of the topics I write about. Today you seldom see any of these various original GM books that dealers and body shops used as everything is on the internet today for the later model cars.

PHOTO 4 – The top left photo shows the cover of this 485 page book. The top middle photo shows the page that clearly states replacement SPID labels are not available. The top left photo shows a typical page from the chapter explaining the option codes on the SPID label. The bottom photo shows an original 1985-1986 SPID label #14065987, which is the one they used for the SPID chapter in this book.



REFERRING TO PHOTO 1 –

Here is a perfect example of an experience I had with a Grand National and frame alignment. Again, it was back in the 1990s something when I was buying Turbo Regals. I got a call from a person in Maryland wanted to sell their Grand National. The car had fresh paint and was mostly stock. I can’t recall their reason for selling it, but I remember the owner did not have it long. Maryland was a quick trip for me. I go with my truck and trailer and check from the Buick dealership O’Neil Buick.

Car looks really nice. I take it for a quick drive around the neighborhood. When I would make right hand turns I could hear the front tire rub the inner plastic fender. When I made left hand turns I did not hear any noise. Outside of that nothing struck me as being unusual or not correct. In most cases I would never hand over the check for the car until I had the car secured on my trailer. This way it gave me more time to look over the car and with the car elevated on my trailer it would make it easier to see the underside and see the exterior from a different angle.

The first disturbing issue I discovered is I always use special brackets to secure the Turbo Regals to the trailer. They are specific for GM car frames. This car did not have the slotted holes in the side of the front frame rails for me to install the brackets. While I was pondering this issue I took a good look at the front tire and the relationship each side had to the outer fender.

The distance was different. In other words one side the tire was closer to the back of the front fender compared to the other side. It didn’t require a ruler to notice this distance! At this point I knew this Grand National was not going home with me. I asked the seller did he ever have anyone follow him down the road and comment that the car did not seem to track straight. He said no and denied any knowledge of any issues with the body and frame.

I then gave him the bad news that I was not going to buy his Grand National. I told him my findings and said I don’t know the exact issue with this Grand National, but I can’t buy it as I would not be able to sell it based on what I have discovered. The seller was not happy, but I dodged a bullet! These issues may have explained why the car had a fresh paint job.

True story…..



REMEMBER THE VIDEO PROFILE THAT WAS DONE LAST YEAR? –

Steve, the producer of that video, is now producing an automotive radio show in the Philadelphia market and is currently looking for sponsorship. Sponsors will receive commercial air time during the program as well as web and video presence. Because it’s the inaugural season of the show, rates are low compared to standard radio rates.

Business owners, particularly those in the Philadelphia region who are looking for a new way to advertise, should contact Steve at steve@carsmartradio.com and check out the website at www.carsmartradio.com

Few years back I bought Steve’s Grand National.



300-MILE 1987 GRAND NATIONAL HARDTOP –

You can now view a total of 16 photos of this 266-mile 1987 Grand National. I also have a list of all the work that was done to freshen up this prime example back to its original glory. A rare chance to own one of the lowest mileage 1987 Grand Nationals in the country.

This car has enjoyed inside storage in a warehouse in Texas since it was purchased and tucked away. Until last November 2017 it only had 50 miles on it! I am waiting for more info. Even the window sticker is still attached to the window!

Car has now been fully detailed.

Own one of the best 1987 Grand Nationals with less than 300 actual miles since new. Asking price is $62,900.

See below link for photos.

Here is the link to the other photos of this pristine car on our website.



38th ANNUAL GS NATIONALS –
October 24th - 27th, 2018
The dates for this year are October 24-27, 2018. Same location, Beech Bend Race Park, Bowling Green, Kentucky. For more info, go to their website - GSnationals.com 



GOOD NEWS - WE ARE ACCEPTING CLASSIFIED ADS -

Good news - We now accept Classified Ads in our weekly Inner Circle emails. Over the years several customers have asked about placing an ad in our weekly Inner Circle.

Here are the options and the costs.

Ads can be from any individual or company. It needs to be automotive related, meaning it does not need be specifically Turbo Regal related. It can be for something for sale or something wanted.

Maximum number of words is 125 words, which is about 7 to 9 lines of copy. No photos. You can list a website. We recommend you state your name, phone number or email, a price, and your location in your ad.

The cost for 2 consecutive weeks is $25. The cost for 4 consecutive weeks is $40. You save $10 with the 4-week plan. No changes can be made to your existing running ad. You can only run one ad at any given time. We will have a code system at the end of your ad, so we will know what week number your ad is to run - 2 or 4 weeks.

It can be an ad for something for sale or an ad for something you are looking for.

We have never missed a single week since we started the Inner Circle email format in 2009. It’s something I enjoy doing and I just always seem to have enough material to write about.

Our weekly Inner Circle reaches over 3,300 members every Wednesday direct to their inbox. The Inner Circle also appears every Wednesday on our website with the related photos. Your ad would be visible to both groups of readers. So, the exposure to your ad is well over 3,200 potential buyers.

Ads submitted properly by the previous Sunday would appear that next Wednesday in the weekly Inner Circle. Ads must be submitted by email to - denniskirban@yahoo.com 

Payment by credit card must be done by phone to our office 215-766-1611 x 0.



CLASSIFIED AD –

AD – 1967 GS BUICK PARTS FOR SALE –

Some NOS, some used and reproduction pieces. Grille center molding, NOS pair of 5958827 Left and right signal lamp lenses, NOS cigar lighter, Pair of good used signal lenses, Rechrome outside door handles, trunk letters, tail lamp bezels, quarter and trunk moldings. First and second design 2-piece wheel opening moldings, NOS and used antenna bezels. NOS 40927 AC fuel pump, correct distributor and Q-jet carb with tag, NOS side view mirrors and more! Call or email salvat3800@gmail.com or 914-845-4446. 3 of 2



AD - 1987 TURBO REGAL HARDTOP FOR SALE –

This is a 73,000 mile original California survivor, 100% rust free, dark blue exterior and matching interior. Car has never been in storage, always slightly used. Factory aluminum wheels, aluminum drums, aluminum bumper inserts, all upgrades have been done, but still looks totally stock and very correct throughout. Ice cold A/C still uses R12, PW, tilt, cruise, posi, window sticker, original exhaust with correct replacement muffler, under carriage as clean as the top side. Car is fully detailed for show, drive anywhere. The car received “Award of Excellence” at 2013 East Coast Regionals. It can be seen at this year’s East Coast Buick Regionals at Cecile County Maryland Dragway on September 15th. It needs nothing, runs better than new best offer over $20k. I am a member of NE GS/GN Club and co-director local BCA Club. Contact Steve Perry 914-262-9965 for more info and pictures. Carmel, NY. Email sep440@aol.com 4 of 4



NOTE - IF YOU ARE NOT ABLE TO SEE THE RARE PARTS SECTION -

If you are not able to see the Rare Parts section at the end of this Inner Circle, it is because you are not an Inner Circle member, but instead are reading this on the website. You must subscribe to see the Rare Parts section each week. It would go directly to your inbox every Wednesday afternoon. It is FREE, probably one reason why nobody complains about what I write about. Simply email - Christina@kirbanperformance.com - to get on our weekly Inner Circle email.

My Rare Parts section is only viewed by those that subscribe. Subscription is free, so complaints on what I write are nonexistent!



EMAILS TO KIRBAN PERFORMANCE -

NOTE- If you email us and do NOT get a timely reply, be sure to check your “SPAM” folder. Some emails do not go thru.

If you need to email us, use - Christina@kirbanperformance.com



TIPS AND IDEAS YOU HAVE TRIED -

If there are any tips or ideas you want to share with our readers, email me – denniskirban@yahoo.com



TIP FROM KIRBAN –

With winter weather around the corner, it’s a great time to plan out your winter projects for your Turbo Regal.



CORES NEEDED -

Here is the information on our credits for cores.

URGENT NEED - Powermaster brake units. The must be complete. We will now issue you a Letter of Credit for $150 for each acceptable core. We currently will not buy any powermaster units outright, only Letter of Credit towards parts.

If you ship to us, the post office is the cheapest method. Pack the item(s) with a note with your name, address and phone number. These are the only 2 items we are currently accepting as cores.

MAIL - Ship to Address -
KIRBAN PERFORMANCE PRODUCTS
PO BOX 1199
PLUMSTEADVILLE, PA 18949

UPS - Ship to Address -
KIRBAN PERFORMANCE PRODUCTS
6201 Kellers Church Road
PLUMSTEADVILLE, PA 18949-1199



TECH CALLS -

If you need technical information, it’s best to email – Christina@kirbanperfomance.com - rather than call us. We will do our best to answer any technical questions within 24 hours. Please remember I have very little knowledge of the mechanical workings of the engine.



NEW PRODUCTS FROM US –

GM Licensed - “GNX - AD from ASC” and 
“1987 GRAND NATIONAL with Hub Caps Background” MUGS

Our GM licensed supplier has taken the two popular Turbo Regal banners and put that same design on a high-quality white 11-ounce ceramic coffee mug.

These GM licensed mugs make an excellent gift for any Buick enthusiast or mechanic. Ideal to for any garage, workshop, office or to display at a car show.

The GNX AD from ASC mug has the artwork repeated on both sides of the mug.

The Grand National layout wraps around the mug.

Another excellent Buick enthusiast gift idea.

7839 - GM Licensed - “GNX - AD from ASC” Mug - $12.95 

7840 - GM Licensed - “1987 Grand National with Hub Caps Background” Mug - $12.95

Here is a link to these mugs on our website.



1984-1987 Buick Regal (All Models) -
Reproduction METAL RADIO BRACKETS (2) SET

We now offer an excellent reproduction of the unique brackets Buick used to secure the radio in any 1984-1987, Regal including the Turbo models.

The metal bracket is the same for both sides but mounts differently on each side of the GM radio.

This is a critical part you need to install any factory correct 1984-1987 GM radio. It also fits many of the later GM radios that have the same frame and size, including some of the early factory GM CD players.

Another excellent replacement for any interior restoration.

7838 - 1984-1987 Buick Regal (All Models) -
Reproduction Metal Radio Brackets (2) Set - $25

Here is a link to these brackets on our website.



ALWAYS LOOKING FOR IDEAS -

If you have any product ideas that would fit our Turbo Buick market that you would like to see available, email me direct - denniskirban@yahoo.com



ALWAYS IN A BUYING POSITION FOR TURBO REGAL PARTS -

Got any Turbo Buick parts you are not using? Why not cash them in for parts you need with a Letter of Credit. We also may buy your new or used parts. Simply email me a list - denniskirban@yahoo.com. Also, we are still buying dead or partially dead 1984-1987 Turbo Regals under $4,000 that are within 250 to 350 miles of our location.



NOTE - ABOUT LINKS IN THE INNER CIRCLE -

We have heard from a couple people that have had problems with the links in our Inner Circle.

When we check the links, they work fine. However, if you are not able to be directed to the exact website page or internet site, you can "copy" and "paste" the link into the URL in your browser (such as Safari, Firefox, Internet Explorer, Google Chrome, etc.) If it doesn't link in one browser, it may work in another.

Most people having problems are using Internet Explorer. If you are having issues with links, try another browser to see if it works.

You may need to "UPDATE" your browser to be use you are using the current version.



NOTE ABOUT PHOTOS ON THE WEBSITE -

We have heard from a couple people that have viewed the photos on the website. Because these must be low-resolution photos to work on the Inner Circle segments on the website, any photos of text don't appear clear when enlarged. This is a problem when you are trying to see numbers, such as those on the VIN labels or pages from Options booklet. Also, because of photo reproduction and computer screen variations, the colors may not be true to the actual product or photo.

If you would like to have us email you any photo at the higher resolution for viewing, just email us and we will email them to you. Be sure to be specific on which pictures you want to see - Reference Inner Circle date and photo number 1, 2, 3 or 4 - denniskirban@yahoo.com



ABOUT OUR EMAILS -

Any inquiries concerning used parts, you must email me direct - denniskirban@yahoo.com - I will answer you. However, if I fail to answer you within 24 hours, please email us again. Since expanding into used parts, I get a lot of emails and sometimes I may forget your request or may not remember who requested the item.



IN CLOSING –

It is only a few short weeks before the annual GS Buick Nationals in Bowling Green, Kentucky. This is the last Buick specific event for 2018. We are not planning to attend this year.