12-01-2021 Inner Circle

12-01-2021 Inner Circle

Greetings Turbo Regal Inner Circle Members 12-01-2021 -


Due to website issues last weekend we have made an executive decision with our staff to extend the 10% discount on orders of $100 or more thru 12 midnight tomorrow night Thursday December 2nd 2021. There is no limit on the number of orders you place. Discount will be refunded to your credit card when your order is processed. Shipping is not included in the 10% discount. Hopefully the website will already be fixed by the time you read this. Another option is to email [email protected] with a list of the parts you want and your name and address. She can usually figure out the part numbers if you do not have them handy. She would confirm with you prior to your order being processed. This way we covered all the possible angles before the deadline!


The actual count of M&Ms in the new Turbo Regal windshield washer bottle was 1,760. I was surprised how many guesses were north of 4,000 M&Ms. It would be hours counting that many M&Ms! Our winner with a guess of 1,642 was the closest under the actual total was Adam and Kim. They hail from Massachusetts. They have been subscribers for 12-15 years. His grandfather was an avid Buick customer. So much so Buick even sent his grandfather thanking him for purchasing 16 Buicks over his lifetime! In 2001 Adam purchased a restored 1986 Grand National for just $8,000. The seller needed the money to restore an Olds W-30. He knew if he passed on it it would probably never happen again. His guess was just a guess based on previous M&M contests. Congrats to Adam and Kim.


Remember only subscribers can see the Rare Parts and prices. If you are not a subscriber simply email me direct [email protected] to join. It's free. We now have sent over 700 weekly Inner Circle emails. Rare parts have numbered over 4,000! We also have over 3,600 subscribers. To my knowledge we are the only supplier/vendor that does a mid week Inner Circle email 50 weeks a year!

I have started to unload this 12 foot trailer of parts. Some of the parts brought back memories for me as I remember some of the parts that we used to make. For example the GNX fender covers is one of our products dated 1990. No one has made them since that I am aware of. So watch the next few issues to see what pops up from 20 plus years of being stashed away in GM plastic containers.

PHOTO 1 - The top left photo we show still in the original wrapper is the GNX fender covers we had made back in 1990 over 30 years ago. I have several pairs. They are listed under the Rare Parts Section for sale. The top right photo shows a real nice used original stock intercooler. The bottom left shows a nice original am/fm radio. The bottom right photo shows a grey dash pad. All these parts can be found under the Rare Parts section for sale.

PHOTO 2 - The top left photo shows a complete used oil fill assembly, a good used complete boost line kit, and a real nice original set (3) AC dash vents. The top right photo shows one of the brackets for the intercooler. The bottom left and bottom right photo shows the front and back of an original C & A (Collins and Aikman) dated 1988 Pallex grey material in mint condition. Again all these parts can be found under the Rare Parts section for sale.

PHOTO 3 - The top left photo is unique. It shows 2 original stock inlet pipes. Notice how wrinkled the underside is of the one pipe! The top right photo shows a good used mass air hose and a nice used radio bezel. The bottom left photo shows the original used set of seat belt guides and both bucket seat grey side panels. Also the diagnostic cap. The bottom right photo shows all the black bucket seat trim. All can be found under the Rare Parts section for sale.


We now offer this TR-6 High Tech ignition system created by Bailey Engineering who has been very instrumental in creating many electronic parts to vastly improve the 1986-1987 Turbo Regals. The scanmaster and Translator are just two that have had a huge impact. This complete kit includes our custom grey plug wires to maintain the stock appearance under the hood.

Each kit comes with complete directions. The unit maintains the stock location. This is a higher than stock power ignition system. It works with your stock wiring.

PHOTO 4 - We show this complete kit. We also sell the custom grey plug wires by themselves if you already have the kit. The part #7961is for the entire kit. For the wires alone #7962 is the part number.


We recently acquired several plastic bins packed with used 1984-1987 Turbo Regal interior plastic trim parts. Almost every imaginable plastic interior part including ecm covers, T-Top moldings, seat trim, a-pillar moldings in various colors, including door panel armrests, and pull straps. No actual door panels. Email me personally [email protected] with your requests. Good chance we will have it.


It was the early 1970s. We had just moved into a house we were renting. It had a 5 bay garage and inground swimming pool. The street out front was a major 4 lane main highway. I had recently purchased my first tow truck from a local Atlantic gas station. My first towing business was towing abandoned cars from various apartment complexes in the area for the companies that owned the actual complex. At the same time I was operating a printing business to print all my Dads literature for his mailings. I had just completed my 3 year stint in the Army. It was Fall. I remembered the Atlantic station where I bought my tow truck from sold Christmas trees. I figured with our location on a 4 lane major highway and the fact we ran the printing business from the house we could also sell Christmas trees since someone was always around during the day.

My first mistake was I did not realize you don’t hand pick the trees that you wish to purchase. A tractor trailer delivers a full load of pre-cut trees and you pay on delivery. My next mistake was the closer December 25th came the more you needed to reduce the price of the trees as come December 26th the demand no longer exists for cut down Christmas trees. The other issue is alot of our friends wanted a special deal. When it was all said and done I think our net profit was less than $50. So a word to the wise selling fresh cut Christmas trees may be one business adventure you want to avoid if net profit is your goal. Fortunately our towing and printing business was not seasonal! Although towing abandoned cars from apartment complexes was not without risks! In some cases we had to have a cop come with us.


As of right now we have a good supply of these on hand for immediate delivery. If you have a powermaster brake system eventually this bowl will need to be replaced. You can order through our website.


Car is located near Chicago. It is a hardtop with a mere 26,000 miles on it. Two owners. Car was taken down to bare metal and repainted 8 years ago. Car was always kept in the garage. Paint does have some flaws. Paint is cracking on the header panel. Overall nice exterior with all new weathersripping and seals. Concert sound II car with factory radio. No cracks in the dash or console. No tears or fading in the seats.

Under the hood is a built factory block with stock crank, rods, forged pistons and a comp camshaft. Everything is well documented. Engine was built by Gary Oswald of Street Performance, a well known performance shop from years ago. Car has only gone about 1,000 miles since the work was done. Maintains factory heat and AC. The entire car is rust free. Rides on reproduction GNX style wheels with new tires. Perfect turn key, enjoyable show and street car. Asking price is $38,500. Clean title and carfax. Partial trades considered. Email me [email protected] and I can provide more info and photos.


We badly need the original not cracked 1986-1987 Turbo Regal AC Delco mass air flow sensors. Each core is worth a $40 letter of credit. Remember every core we get no matter what part it is we sometimes get ones that can’t be rebuilt. It's unfortunate, but true. It happens frequently with turbo cores especially. Also we need powermaster brake units and original 1986-1987 Turbos. We need cores to get rebuilt to help others maintain their cars. If the situation gets much worse it will force us to raise the price of cores as some customers are not returning them to get their core deposit back.


This 1993 GMC Typhoon is white with a black leather interior. Paint is original. Currently it has just 73,000 miles on it. It has the ATR upgraded Intercooler, a $2,000 upgrade. (AC currently unhooked because of the ATR intercooler). The Typhoon is located in the midwest. The price is $18,900. For more info, email me direct [email protected]


We now have all the braces in stock, no waiting. We also got in the upgraded injectors part #1544. We just got in valve springs #6746. We also have the stock trunk carpet #6509 in stock. Also Pypes Dual Exhaust, and Jeep modified brand new lower steering shafts.


We will only post any new additions to avoid confusion. Refer to previous Inner Circle emails to see the entire list.


If you have an idea or tip or a product idea, send it to my email [email protected]


If you are returning any cores for a Letter of Credit or cores that we charged you for, it is important that you send them to the address below.


For all other returns such as a part you purchased that is incorrect or defective you must call Christina and get a RA number. She will determine if it goes to our main warehouse in Kintnersville, PA or our distribution center.


In order for our Inner Circle members to have an equal opportunity on the Rare Parts, no emails regarding orders on rare parts will be honored prior to 3 pm Wednesday. This way Inner Circle members get the opportunity first to purchase any of the rare items that may be pictured in the main body of the Inner Circle which may go on our website earlier in the day each week. Inner Circle members are the ONLY people that get to see the Rare Parts listing and see the prices


Here is the information on our credits for cores.

STEERING WHEEL CORES. Currently we need good 1986-1987 Turbo Regal steering cores. They must be straight and not have rusted spokes. We will issue a Letter of Credit of $100 for each acceptable core. You must email me [email protected] a photo first to make sure the steering wheel is acceptable.

POWERMASTER BRAKE UNITS. Currently, we are accepting powermaster brake units. We give a $150 Letter of Credit for each acceptable core. Or, we will pay $125 cash for each powermaster core. To avoid having your core not accepted, you MUST first email me a photo of the core you plan to send in - [email protected] - We will NOT accept any cores that have severe rust issues or have been disassembled. Core must have the brake switch and brake bowl reservoir. Too many of the cores we have been getting are in such terrible shape they are worthless to us.

TURBO CORES must be the 1986-1987 Turbo Regal stock turbo. They must be complete. We will issue you a $175 Letter of Credit for each acceptable core. We need cores now. Or we will pay $150 cash for each complete stock turbo core.

BRAKE PEDALS we issue a letter of credit for $50 for each powermaster brake pedal or we will pay $40 cash for each pedal.

MASS AIR FLOW SENSORS must be the 1986-1987 Turbo Regal sensors. They can not be cracked or broken. Each acceptable unit is worth a letter of credit of $40 each. We need cores now!

If you ship to us, the post office is the cheapest method. Pack the item(s) with a note with your name, address and phone number.

UPS or MAIL - Ship to Address –


Good news - We now accept Classified Ads in our weekly Inner Circle emails. Over the years several customers have asked about placing an ad in our weekly Inner Circle.
Here are the options and the costs.

Ads can be from any individual or company. It needs to be automotive related, meaning it does not need to be specifically Turbo Regal related. It can be for something for sale or something wanted.

Maximum number of words is 125 words, which is about 7 to 9 lines of copy. No photos. You can list a website. We recommend you state your name, phone number or email, a price, and your location in your ad.

The cost for 2 consecutive weeks is $25. The cost for 4 consecutive weeks is $40. You save $10 with the 4-week plan. No changes can be made to your existing running ad. You can only run one ad at any given time. We will have a code system at the end of your ad, so we will know what week number your ad is to run 2 or 4 weeks.

It can be an ad for something for sale or an ad for something you are looking for.
We have never missed a single week since we started the Inner Circle email format in 2009. It’s something I enjoy doing and I just always seem to have enough material to write about.

Our weekly Inner Circle reaches over 3,500 members every Wednesday direct to their inbox. The Inner Circle also appears every Wednesday on our website with the related photos. Your ad would be visible to both groups of readers. So, the exposure to your ad is well over 3,400 potential buyers.

Ads submitted properly by the previous Sunday would appear next Wednesday in the weekly Inner Circle. Ads must be submitted by email to - [email protected]

Payment by credit card must be done by phone to our office 215-766-1611.


If you are not able to see the Buick Rare Parts section at the end of this Inner Circle, it is because you are not an actual Inner Circle member, but instead are reading this on the website. You must subscribe to see the Rare Parts section each week. It would go directly to your inbox every Wednesday afternoon. It is FREE, probably one reason why nobody complains about what I write about. To subscribe simply email – [email protected] - to get our free weekly Wednesday Inner Circle email.

Remember the Buick Rare Parts section is only viewed by those that subscribe.


NOTE - If you email us and do NOT get a timely reply, be sure to check your “SPAM” folder. Some emails do not go through.

If you need to email us, use - [email protected]


If you need technical information, it’s best to email - [email protected] - rather than call us. We will do our best to answer any technical questions within 24 hours. Please remember I have very little knowledge of the mechanical workings of the engine.


1986-1987 Buick Turbo Regal -

This is the complete kit including the custom grey plug wires, late model GM coil module, and upgraded TR 6 module. Detailed instructions are also provided with each kit.

This is a higher than the stock power ignition system. It requires a 25A fuse in the CCC1 fuse to handle the increased current flow. The stock wiring is adequate to handle the increased current flow.

This kit is built by Bailey Engineering, who has many years in developing the various products we offer for ignition systems for the 1986-1987 Turbo Regals.

You can set the Rev Limit with this kit.

The unit mounts in the stock location. It is a heavy die-cast powder-coated aluminum enclosure. It has an Advanced 32bit microprocessor. It includes a built in 2-step Launch Control System and can be ran in either wastepark or sequential firing.

Safety mode shuts down the engine if unsafe signals or sensors are detected.

Fully plug-and-play with the stock vehicle harness.

This is a must have upgraded ignition system if you are making modifications to the stock format.

NOTE - Due to the complexity of this system, we recommended it be installed by a qualified mechanic.

An excellent upgrade to the ignition system.

7961 - 1986-1987 Buick Turbo Regal - TR-6 High Tech Ignition System (includes custom coil module, late model GM ignition coil, and grey spark plug wire set) - $694.95

CLICK HERE - For the link to this Ignition System on our website.

1986-1987 Buick Turbo Regal -

The same company that makes our regular grey Custom-Cut, High-Performance Grey Plug Wire Sets, Part #1531, for the factory 1986-1987 Turbo Regal set up also makes these correct plug wires for the Bailey TR-6 High Tech Ignition system for us.

This set of plug wires has the proper lengths and proper connectors for the upgraded coil.

The wires are grey to closely resemble what Buick used originally on their spark plug wires.

A nice upgrade if you have the TR-6 High Tech Ignition System.

7962 - 1986-1987 Buick Turbo Regal - Grey TR-6 Plug Wires (6) Set - $99.95

CLICK HERE - For the link to this Plug Wires Set on our website.


We carry a GM licensed “GNX & GRAND NATIONAL” T-shirt for the many Turbo Regal enthusiasts out there.

It is a black GM Licensed T-shirt with a distinctive artwork design of a GNX and GRAND NATIONAL and the Grand National and Tri-Shield logos on the back in full color. The Grand National logo is silkscreened on the upper left area on the front.

Shirts are Gilden brand high-quality 100% cotton with the GM Licensed tag attached.

We stock the 3 most popular sizes - LARGE, X-LARGE, and XX-LARGE.

The T-shirt makes a great statement at a car show, and T-shirts also make a great gift for that Turbo enthusiast or for your mechanic.

Here are the 3 options for these T-shirts.

7965-L - GM Licensed “GNX & GRAND NATIONAL” BLACK T-shirt - size LARGE - $24.95

7965-XL - GM Licensed “GNX & GRAND NATIONAL” BLACK T-shirt - size X-LARGE - $24.95

7965-XXL - GM Licensed “GNX & GRAND NATIONAL” BLACK T-shirt - size XX-LARGE - $26.95

CLICK HERE - For the link to this T-shirt on our website.

1984-1987 Buick Turbo Regal -

This new aluminum finned transmission pan has a drain plug for easy access when changing the transmission fluid.

This pan holds 2 quarts more over the stock factory transmission pan.

It comes complete with mounting hardware, new AC Delco gasket, and transmission filter.

An excellent upgrade for your transmission.

7963 - 1984-1987 Buick Turbo Regal - 200-4R Aluminum Finned Transmission Pan - $299.95

CLICK HERE - For the link to this trans pan on the website.

1983-1987 Buick Turbo Regal & 1978-1988 Oldsmobile Cutlass-

We offer this new upgraded floor shifter with or without a NOS GM grey shifter handle.

NOTE - You will need to transfer your original parts to the new handle.

This new upgraded floor shifter has several improvements over the factory original shifter. The original shifter had a steel chrome-plated handle. This was prone to rust. Also the grove at the top where the handle locks in is subject to breaking, which causes the handle to not stay in the correct position.

The new handle is stainless steel so it will not rust and it is stronger than the original steel handle. Where the shifter cable attaches to the factory pin can wear over a period of time. This pin on the new shifter is stainless and welded into place to eliminate those issues.

Buick never painted the base plate or the driveshaft. Most are now rusted. The new plate is painted. The spring for the J hook can also rust and lose tension over time. The new spring has upgraded tension for cleaner, firmer shifts. The original J rod bends over time and will not always return into alignment of the detent bracket. This was solved by increased hardened steel. The detent bracket is also subject to wear issues. The new detent bracket is made in stainless steel to avoid those issues.

All these improvements make for a nice upgrade that you will quickly notice each time you shift from Park to Drive.

Another excellent replacement for any interior restoration.

7959 - 1983-1987 Buick Turbo Regal & 1978-1988 Oldsmobile Cutlass - Reproduction Upgraded Floor Shifter - $269.95

7960 - 1983-1987 Buick Turbo Regal & 1978-1988 Oldsmobile Cutlass - Reproduction Upgraded Floor Shifter & Handle - $299.95

CLICK HERE - For the link to the shifter on our website.

1986-1987 Buick Turbo Regal -

Over time, an original under hood (insulator liner) pad can deteriorate or rodents may have eaten holes in the material.

We now offer the NOS GM 1986-1987 Buick Turbo Regal 8-hole under hood insulator liner pad.

This will be shipped in the original GM box and include 8 new push pins.

NOTE - Price includes the oversized box shipping and handling by UPS Ground shipping to the 48 U.S. contiguous states.

These have the wording “BUICK - TURBOCHARGED” with the Turbo-Six logo.

Another excellent replacement for any engine compartment restoration.

#7926 - 1986-1987 Buick Turbo Regal - GM 8-Hole Molded Under Hood Insulator Liner Pad - $499.95

CLICK HERE - For the link to this Hood Pad.

1986-1987 Buick GRAND NATIONAL -

Because of many requests, we now offer reproduction Grand National wheels.

This high-quality reproduction of the popular chrome steel 15" by 7" Grand National wheel has been well received since it was first introduced a few years ago. Due to the high costs involved in getting original steel wheels re-chromed, it has made this reproduction Grand National wheel in aluminum extremely popular among Grand National owners. In order to re-chrome the original steel Grand National wheels, it requires the wheels to be cut apart so the center is separated from the outer rim.

These reproduction wheels have the same back spacing as the original wheels, 3.75". The entire wheel is fully powder coated. This was done for corrosion protection. The front of the wheel is done in the correct black powder coating. This will not flake off. The center caps with these wheels have the correct looking “Turbo 6” logo in the matching original colors. To make the caps stay in place on the wheel a snap ring is used on the back side of the cap.
The opening for the center cap is 3". You can install a T-Type center cap or a GNX-style center cap if you desire to achieve a different look. The inside lip that appears on the front of the steel wheels, which usually collected dirt and eventually rust, was eliminated. Water would generally get trapped in that area of the wheel.

Aluminum wheels have several advantages over the steel chrome wheels. The major advantage is the weight savings. Also, no more issues with rust. The typical steel Grand National wheel with center cap weighs 28.36 lbs. This reproduction aluminum 15" by 7" Grand National wheel with center cap only weighs 17.76 lbs. When you multiple by 4, you can see the tremendous weight savings over the steel chrome Grand National wheels.

All wheels are tested and speed rated. Each set comes complete with center caps, lug nuts, and valve stems.

Wheels are dropped shipped from Illinois and a set of 4 wheels generally costs about $65-$100 for shipping to any of the 48 contiguous states. Call for shipping for other states or Canada - 215-766-1611.

NOTE - You may also be interested in these related parts - #6820 KYB Front and Rear Gas Shocks (4) Set, #7487 Reproduction P215/65-R15 Goodyear Eagle GT TIRES (4) SET.

NOTE - If you are interested in tires, call our office - 215-766-1611 - to get special pricing on BF Goodrich tires in the correct size. We can also have the tires mounted on the wheels.

7956 - 1986-1987 Buick Grand National -
REPRODUCTION GRAND NATIONAL 15" x 7" Wheels (4) SET - $995.00 / set
NOTE - Set includes 4 Wheels, 20 correct Lug Nuts, 4 chrome-plated Valve Stems, and 4 “Turbo 6” Center Caps.

7957 - 1986-1987 Buick Grand National -
REPRODUCTION GRAND NATIONAL 15" x 7" Wheel, 1 “Turbo 6” Center Cap, 5 correct Lug Nuts, and 1 Chrome-plated Valve Stem - $249.00

7958 - 1986-1987 Buick Grand National -
REPRODUCTION GRAND NATIONAL “Turbo 6” Center Cap (1) - $48.95

CLICK HERE - For the link to these wheels on our website.

1984-1987 Buick Turbo Regal -

This is an attractive 30 lb. boost and vacuum combination gauge has a 2" diameter face, which fits any of the A-pillar holders, single or twin gauge holders we offer.

It is made by Garrett, the same company that makes the turbo found on the 1984-1987 Turbo Regals. It’s the perfect combination boost and vacuum gauge for your Turbo Regal.

The quality is excellent and features a silver bezel face, red needle, silver boost numbers, and red vacuum numbers.

The kit will allow the factory gauge and this gauge to function at the same time.

Gauge comes light, tubing, and directions to install in any 1984-1987 Turbo Regal.

Another excellent replacement for any interior restoration.

6627 - 1984-1987 Buick Turbo Regal - Garrett Combination 30 lb Boost and Vacuum Gauge - $99.95

CLICK HERE - For the link to this gauge on our website.

1984-1987 Buick Regal (All Models) -

For the serious racer who wants every available advantage. These are made from the same bumper molds we used to sell over 35 years ago. My son did the prep work using the original bumpers on my 1987 Grand National.

These are for the serious racer and not designed for street use since they offer very little protection in case of an accident.

Both bumpers are done in black gelcoat and can be sanded and painted. The factory marker lights and bezels will fit the openings in the front bumper. Both molds were fully prepped and eliminated the rubber cushion completely. Both bumpers have a smooth front since the rubber cushion was completely eliminated. Both bumpers have fiberglass brackets on the back side that are slotted for adjustments to attach just like the original bumpers.

The fiberglass front bumper weighs just 8 pounds. The stock steel bumper with the reinforcement brace can weigh as much as 45 pounds depending on whether the reinforcement brace is steel or aluminum. You save 37 pounds.

The fiberglass rear bumper weighs less than 10 pounds. The stock steel rear bumper weighs as much as 45 pounds depending on whether it has a steel or aluminum reinforcement brace. You can shed as much as 35 pounds with this fiberglass rear bumper.

We have a special price if you buy both fiberglass bumpers at the same time.

NOTE - Our bumpers are for OFF ROAD USE ONLY! They are NOT made to withstand any collision! NOT LEGAL FOR STREET USE!

NOTE - We recommend these bumpers be installed by a qualified autobody shop. Bumper should be sanded and painted. Easy to install.

Another excellent replacement for any exterior restoration.

*NOTE - Price includes the shipping and handling UPS Ground Shipping to 48 U.S. continental states

1507 - 1984-1987 Buick Regal (All Models) - Reproduction Fiberglass FRONT Bumper - $349.95 includes Free Shipping

1532 - 1984-1987 Buick Regal (All Models) - Reproduction Fiberglass REAR Bumper - $349.95 includes Free Shipping

7949 - 1984-1987 Buick Regal (All Models) - BOTH Reproduction Fiberglass FRONT & REAR Bumpers - $649.95 includes Free Shipping

CLICK HERE - For the link to these bumpers on our website.


If you have any product ideas that would fit our Turbo Buick market that you would like to see available, email me direct - [email protected]


Got any Turbo Buick parts you are not using? Why not cash them in for parts you need with a Letter of Credit. We also may buy your new or used parts. Simply email me a list - [email protected]

Also, we are still buying dead or partially dead 1984-1987 Turbo Regals under $4,000 that are within 250 to 350 miles of our location.


We have heard from a couple people that have had problems with the links in our Inner Circle.

When we check the links, they work fine. However, if you are not able to be directed to the exact website page or internet site, you can "copy" and "paste" the link into the URL in your browser (such as Safari, Firefox, Internet Explorer, Google Chrome, etc.) If it doesn't link in one browser, it may work in another.

Most people having problems are using Internet Explorer. If you are having issues with links, try another browser to see if it works.

You may need to "UPDATE" your browser to be used if you are using the current version.


We have heard from a couple people that have viewed the photos on the website. Because these must be low-resolution photos to work on the Inner Circle segments on the website, any photos of text don't appear clear when enlarged. This is a problem when you are trying to see numbers, such as those on the VIN labels or pages from Options booklet. Also, because of photo reproduction and computer screen variations, the colors may not be true to the actual product or photo.

If you would like to have us email you any photo at the higher resolution for viewing, just email us and we will email them to you. Be sure to be specific on which pictures you want to see - Reference Inner Circle date and photo number 1, 2, 3 or 4 - [email protected]


Any inquiries concerning used parts, you must email me directly - [email protected] - and I will answer you. However, if I fail to answer you within 24 hours, please email us again.
Since expanding into used parts, I get a lot of emails and sometimes I may forget your request or may not remember who requested the item.


Remember, the weekly Inner Circle always goes out at 3 pm eastern time so subscribers all have the same equal chance on the Rare Parts. All our parts generally are priced to sell and below what others offer. Also our used items are exactly as described. Emails are acknowledged in the order we receive them regardless of when I respond as I am not always by a computer and I only use a flip phone. It's best to email as soon as possible as many of our items sell within the first hour! Do NOT call the office on the listed Rare Parts as you could lose out by someone beating you with an email.