Select your vehicle below for: CPB HYDRO BOOST CONVERSION KIT #7619

Specials  
CPB HYDRO BOOST CONVERSION KIT #7619
CPB HYDRO BOOST CONVERSION KIT #7619
 

$749.95
 
Product Description
 

1986-1987 Buick Turbo Regal -
CPB HYDRO-BOOST CONVERSION KIT

This brand new CPB hydro-boost system and directions are specified to fit the 1986-1987 Turbo Regal models with the understanding that the application is specific - This means you must have the original powermaster brake pedal in your Turbo Regal for it to bolt up. You will also need the firewall mounting bracket that the powermaster bolts to, so you can attach it to the new hydro-boost unit. Everything in this kit is brand new.

NOTE - email - denniskirban@yahoo.com - if you need a pedal assembly. It is NOT compatible with a vacuum assist G-Body brake pedal.

Kit comes complete with everything you need including the fasteners to secure the master cylinder to the brake unit. The actual hydro-boost unit complete with the special adapter is drop shipped from our supplier. Everything else in this kit, including the directions and receipt, is shipped from our warehouse in Pennsylvania. You can expect to receive the hydro-boost unit within a week of getting the other parts from us.

NOTE - We recommend you either clear coat or paint the master cylinder prior to installing it, since it is brand new bare metal.

This kit is 100% BRAND NEW high-quality direct bolt-in hydraulic brake assist system designed to upgrade your brakes with a powerful and compact modern hydraulic assist unit. This system includes everything you need to install into your vehicle. It consists of a direct fit high-performance high-pressure rubber hoses, brake assist unit, heavy-duty power steering return line, pedal rod hardware and mounting hardware. Using all new parts, this unit puts out an amazing 2400 psi line pressure at the front calipers.

Here are the specifics:
- This model fits the later GM “short rod / shallow” master cylinder design
- Designed to fit with the 1986-1987 remote power steering reservoir
- For use with disc / drum OR disc / disc brakes
- Installed adapter, so it can be installed in either direction on the firewall mount
- Features an adjustable brake pedal rod set to provide OEM pedal height
- High-pressure rubber power steering hoses will need to be cut and fitted in your application
- No firewall modifications required
- Slight modification is required to enlarge the center hole of the firewall mount

KIT INCLUDES -
1 - Instruction booklet of detailed directions and photos.
1 - New CPB Hydro-boost unit with installed adapter plate
1 - Brand new Corvette master cylinder (It’s best to either paint or clear coat it to avoid rust issues)
1 - Reproduction foam gasket replaces the original gasket between the actual unit and the firewall
1 - Syringe for bench bleeding the master cylinder
1 - Magna Pure filter with clamps
1 - Brass, barbed 3/8 return line T fitting
1 - 6 foot low pressure return hose
2 - High-pressure 5/16 pressure lines. Both have one end already made up approximately 4 foot each in length.
6 - Small hose clamps
12 - Assorted fittings (some you may or may not need to use, depending on how you wish to run the return line)

Kit comes with very detailed instructions in clear, easy-to-read and understand format.

NOTE - We highly recommend installation be done by a qualified auto mechanic.

NOTE - Be sure to check out another option we offer for converting your 1986-1987 Turbo Regal to a hydro-boost system. See #7618 HYDRATECH Hydro-Boost Conversion Kit.

NOTE - This kit uses high pressure rubber hoses which require one end to be cut, then you install the fittings in the kit. The #7618 kit comes with braided stainless pressure lines already partially assembled. Also this CPB kit #7619 comes with a steel adapter plate which allows you to mount the hydro-boost unit right side up or inverted. Both kits have all new parts.

NOTE - You may also be interested in these related parts - #7716 Reproduction of the GM Aluminum Brake Drums (2) Set - 10-Bolt (This would be the correct size for all stock rears on 1984-1987 Buick Turbo Regals), #7717 Reproduction of the GM Aluminum Brake Drums (2) Set - 12-Bolt (NOTE - GM never made aluminum drums for their 12-bolt rears. These were made special to accommodate the 12-bolt axles), #7539 Baer SS4+ Front Brakes and Spindles Upgrade System with BLACK Calipers, #6697 Reproduction Brake Accumulator Bowl, #7679 Conversion Vacuum Brake Booster Kit with New Correct Size PIN for the Stock Brake Pedal, #7625 Conversion Vacuum Brake Booster Kit with Vacuum Brake Pedal, #7698 GM Brake Drum Hardware (26) Kit, #7021 Rebuilt Powermaster Brake Unit, #7189 Reproduction Brake Proportioning Valve, #7459 Reproduction Complete Brake Lines (7) Kit, #7218 Stainless Braided Brake Hoses (3) Kit, #7189 Reproduction Brake Proportioning Valve, and #7459 Reproduction Complete Brake Lines (7) Kit.

7619 - 1986-1987 Buick Turbo Regal -
CPB Hydro-Boost Conversion Kit


 
Part # Applications   Sale QTY
7619  Buick Regal T-Type 3.8 1986-1987   $749.95
7619  Buick Regal Grand National 3.8 1986-1987   $749.95
7619  Buick Regal GNX 3.8 1987-1987   $749.95