1986-1987 Turbo Regal The Pypes Performance 3-inch Dual Exhaust System is a heavy-duty, high-flow upgrade designed specifically for high-horsepower muscle cars and trucks. It focuses on maximizing engine efficiency by replacing restrictive factory piping with a wider, smoother path for exhaust gases. View More
1986-1987 Turbo Regal The Pypes Performance 3-inch Dual Exhaust System is a heavy-duty, high-flow upgrade designed specifically for high-horsepower muscle cars and trucks. It focuses on maximizing engine efficiency by replacing restrictive factory piping with a wider, smoother path for exhaust gases.
For 1982-'87 Buick Regal. Also fits T-Type, Turbo-T, and Grand National. Over time the front bumper marker light trim goes bad due to uncertain weather conditions such as snow, road salt, rain, etc. This can cause cracks, dents, scratches, rust, etc. on your Front Bumper Marker Light Trim. Fortunately, for you we have a replacement in case yours goes bad! This product comes with BOTH the Front Bumper Marker Light Trim as well as the T-15 Torx Screws (2). These are meant to replace GM #25505980 AND 25505981.
Other products you might be interested in include: #KPP7215 Reproduction Black Grille, #KPP7222 Reproduction Black Headlight Bezels (2), #KPP7239 Reproduction Chrome-Plated Plastic Headlight Bezels (2).
For 1982-'87 Buick Regal. Also fits T-Type, Turbo-T, and Grand National. Over time the front bumper marker light trim goes bad due to uncertain weather conditions such as snow, road salt, rain, etc. This can cause cracks, dents, scratches, rust, etc. on your Front Bumper Marker Light Trim. Fortunately, for you we have a replacement in case yours goes bad! This product comes with BOTH the Front Bumper Marker Light Trim as well as the T-15 Torx Screws (2). These are meant to replace GM #25505980 AND 25505981.
Other products you might be interested in include: #KPP7215 Reproduction Black Grille, #KPP7222 Reproduction Black Headlight Bezels (2), #KPP7239 Reproduction Chrome-Plated Plastic Headlight Bezels (2).
Brand NEW wiper motor. Fits 1984-'87 Buick Regal, Buick Turbo, Buick Grand National, Chevy Monte Carlo, & Chevy Monte Carlo SS. Also fits 1984-'88 Oldsmobile Cutlass. Are your wipers moving slow or odd, only moving at one speed, making some unusual noises, or your wipers don't move at all? These are signs that your wiper motor is most likely going out and needs to be replaced. Good news for you, we got you covered!
Other products you might be interested in: #KPP7800 GM Black Windshield Wiper Blades (2).
Brand NEW wiper motor. Fits 1984-'87 Buick Regal, Buick Turbo, Buick Grand National, Chevy Monte Carlo, & Chevy Monte Carlo SS. Also fits 1984-'88 Oldsmobile Cutlass. Are your wipers moving slow or odd, only moving at one speed, making some unusual noises, or your wipers don't move at all? These are signs that your wiper motor is most likely going out and needs to be replaced. Good news for you, we got you covered!
Other products you might be interested in: #KPP7800 GM Black Windshield Wiper Blades (2).
For 1984-'87 Buick Regal/Grand National. This is an OEM flare welting lacing kit (fenders listed separately under #KPP6905). This kit comes with 260" of lacing/welting as well as 35 screws. The flare lacing sits between the GNX style fender flare (#KPP6905) and the Regal fender. The texture of the flare lacing is close to the original.
Other products you might be interested in include: #KPP9605 Reproduction GNX Fender Flares Kit (4), #KPP7219 GNX - Trans Am Style 16" x 8" Wheels Set (4), #KPP7169 GNX Rear Seat Brace, #KPP7073 GNX Style Lug Nuts, Black Plastic Caps, and Valve Stems Set (40), #KPP8700 Polished Stainless GNX Turbo Shield, #KPP1541 Reproduction GNX Fender Louvers (2), #KPP7976 Reproduction GNX Grille Emblem with Bracket, #KPP6740 Upper Body Reproduction GNX Style Body Mount Bushings, #KPP7324 GNX Reproduction Wheel Rims, Set of 4 - 18" x 8".
For 1984-'87 Buick Regal/Grand National. This is an OEM flare welting lacing kit (fenders listed separately under #KPP6905). This kit comes with 260" of lacing/welting as well as 35 screws. The flare lacing sits between the GNX style fender flare (#KPP6905) and the Regal fender. The texture of the flare lacing is close to the original.
Other products you might be interested in include: #KPP9605 Reproduction GNX Fender Flares Kit (4), #KPP7219 GNX - Trans Am Style 16" x 8" Wheels Set (4), #KPP7169 GNX Rear Seat Brace, #KPP7073 GNX Style Lug Nuts, Black Plastic Caps, and Valve Stems Set (40), #KPP8700 Polished Stainless GNX Turbo Shield, #KPP1541 Reproduction GNX Fender Louvers (2), #KPP7976 Reproduction GNX Grille Emblem with Bracket, #KPP6740 Upper Body Reproduction GNX Style Body Mount Bushings, #KPP7324 GNX Reproduction Wheel Rims, Set of 4 - 18" x 8".
For 1978-'88 Chevrolet Monte Carlo/Regal. These stoppers are meant to help keep your hood aligned with the fender and prevent metal to metal contact whenever the hood of your car is shut. Overtime these stoppers wear out and go bad therefore need replacing. If you're experiencing this problem order a set and get your stoppers replaced! SOLD AS A SET OF 2! View More
For 1978-'88 Chevrolet Monte Carlo/Regal. These stoppers are meant to help keep your hood aligned with the fender and prevent metal to metal contact whenever the hood of your car is shut. Overtime these stoppers wear out and go bad therefore need replacing. If you're experiencing this problem order a set and get your stoppers replaced! SOLD AS A SET OF 2!
For 1982-'87 Buick Regal, T-Type, and Grand National. The nut replaces original GM part #10024254 and the bezel replaces original GM part #25526335. This comes as a combo with both the power antenna bezel and nut all in BLACK. Both are made from high rated black plastic similar to the original but better in order to resist cracks and color fading.
Other products you might be interested in: #KPP6976 1984-1987 Turbo Regal - Power Antenna Remove and Installation Guide Book, #KPP7433 Power Antenna Hardware (4 Nuts & 4 Bolts) Kit, #KPP7433 Power Antenna Upgraded Steel Cable Repair Kit, #KPP7702 Rebuild Service for Original Power Antenna.
For 1982-'87 Buick Regal, T-Type, and Grand National. The nut replaces original GM part #10024254 and the bezel replaces original GM part #25526335. This comes as a combo with both the power antenna bezel and nut all in BLACK. Both are made from high rated black plastic similar to the original but better in order to resist cracks and color fading.
Other products you might be interested in: #KPP6976 1984-1987 Turbo Regal - Power Antenna Remove and Installation Guide Book, #KPP7433 Power Antenna Hardware (4 Nuts & 4 Bolts) Kit, #KPP7433 Power Antenna Upgraded Steel Cable Repair Kit, #KPP7702 Rebuild Service for Original Power Antenna.
For 1978-'88 G-Body. Calipers are offered in either red or black!This stock height kit is built to precise specs and are prefitted/assembled to make sure the system works in proper order. This kit includes: 13" cross drilled & gas slotted rotors, 7/16"-20 wheel studs, dual 42mm piston aluminum calipers, 2" stock height spindles, high performance brake pads, C7 aluminum hubs, stainless steel brake hoses, integrate caliper brackets, & hardware. NOTE- ALL KITS HAVE A MATCHED CALIPER SYSTEM, INCLUDE SPINDLES, & REQUIRE 17" OR LARGER WHEELS! View More
For 1978-'88 G-Body. Calipers are offered in either red or black!This stock height kit is built to precise specs and are prefitted/assembled to make sure the system works in proper order. This kit includes: 13" cross drilled & gas slotted rotors, 7/16"-20 wheel studs, dual 42mm piston aluminum calipers, 2" stock height spindles, high performance brake pads, C7 aluminum hubs, stainless steel brake hoses, integrate caliper brackets, & hardware. NOTE- ALL KITS HAVE A MATCHED CALIPER SYSTEM, INCLUDE SPINDLES, & REQUIRE 17" OR LARGER WHEELS!
For 1978-'88 G-Body, Monte Carlo, El Camino. This kit includes both upper & lower body mount "donuts" built from POLYPUS graphite polyurethane. Replace your old and worn out OEM body mount bushings, sleeves, and hardware with these aftermarket parts to improve your overall riding experience. View More
For 1978-'88 G-Body, Monte Carlo, El Camino. This kit includes both upper & lower body mount "donuts" built from POLYPUS graphite polyurethane. Replace your old and worn out OEM body mount bushings, sleeves, and hardware with these aftermarket parts to improve your overall riding experience.
For 1978-'88 G-Body & Monte Carlo. Are your original bushings worn out, faded, or falling apart? Also, if you're looking to do an original rebuild or tighten your suspension up these are the bushings for the job! These are made of polygraphite and are a reproduction similar to the OEM rubber bushings but offer better handling as well as better protection to the weather. This set comes with upper and lower control arm bushings! View More
For 1978-'88 G-Body & Monte Carlo. Are your original bushings worn out, faded, or falling apart? Also, if you're looking to do an original rebuild or tighten your suspension up these are the bushings for the job! These are made of polygraphite and are a reproduction similar to the OEM rubber bushings but offer better handling as well as better protection to the weather. This set comes with upper and lower control arm bushings!
121 to 150 of 178 Products
Email Deals
Be the first to receive exclusive promotions, updates and product announcements. Subscribe to our mailing list now.
Part# KPP7977